Global Connected Product Security Management Market Trends and Insights
Regulatory-Led Product Security Evidence Requirements
The EU Cyber Resilience Act made its incident reporting obligations applicable on September 11, 2026. Manufacturers must report actively exploited vulnerabilities to ENISA and the relevant national CSIRTs within 24 hours, while the broader conformity requirements apply from December 11, 2027. The requirements apply to products with digital elements and make product security evidence a requirement for access to the European market. The FDA’s February 2026 guidance reinforced the requirement to provide software bills of materials for cyber devices under Section 524B of the FD&C Act. Manufacturers that cannot obtain component information from suppliers must document the gap, apply risk controls, and provide a remediation plan. This brings smaller suppliers into the Connected product security management market, as their information now affects the finished product manufacturer's compliance position.Expanding Connected-Device Attack Surface
Connected products place software, firmware, identities, and network interfaces inside equipment that was once isolated. This is most significant in industrial plants, healthcare facilities, vehicles, and other environments where a device failure can interrupt physical operations. Forescout reported an 84% increase in attacks using operational technology protocols during 2025 and said IoT device exploits rose from 16% to 19% of observed exploits. The change increases demand for complete asset inventories, firmware analysis, and clear vulnerability priorities. Product teams must also know whether a disclosed vulnerability is present in a released product and whether it is exposed in the customer environment. These requirements support the Connected product security management market because network monitoring alone cannot supply product-level component and release information.Fragmented Legacy Firmware and SBOM Data
Many products released before 2020 were developed without modern build tools, component manifests, or complete third-party dependency records. Their manufacturers may need binary analysis, reverse engineering, and manual reconciliation before they can generate a reliable software bill of materials. The work delays compliance programs and lengthens buying decisions for the Connected product security management market. The FDA recognizes that a manufacturer may not be able to obtain software bill-of-materials information from every supplier, but it requires justification and compensating risk controls in such cases. This limitation is especially difficult in healthcare and industrial estates where products from multiple hardware generations remain in service. The resulting need for remediation plans can sustain service demand, even when it slows the immediate return from a platform deployment.Other drivers and restraints analyzed in the detailed report include:
- Shift From Periodic Testing to Continuous Product Security
- Growth of Software-Defined and Updateable Products
- Scarcity of Embedded Product Security Engineering Talent
Segment Analysis
Solutions accounted for 66.89% of the connected product security management market revenue in 2026. Large manufacturers commonly prefer a platform that combines firmware analysis, vulnerability management, and compliance evidence into a single operating environment. This preference reflects the profile of early adopters in industrial manufacturing, automotive, and medical devices. These organizations often have security and engineering teams that can manage enterprise software deployments. A platform can connect product releases with the vulnerabilities and supplier components that affect them. It also gives security, engineering, and compliance functions a shared record of remediation activity. The solutions segment is therefore central to procurement programs that cover many product lines and complex supplier relationships. Its position also reflects a need to integrate product security with wider risk and workflow systems. This arrangement supports repeatable security decisions across product lines, supplier programs, and future releases.Services are projected to expand at a 12.67% CAGR through 2032. Smaller suppliers often need assistance with establishing an inventory, preparing software bills of materials, interpreting technical findings, and maintaining disclosure processes. Managed software bill-of-materials services and outsourced vulnerability tracking are relevant to medical device makers that must keep documentation current after market entry. FDA guidance continues to emphasize the importance of cybersecurity documentation in premarket submissions and product maintenance. Services can help a supplier meet requirements without building a large internal team. This helps platform providers serve companies with limited in-house capability. It also supports hybrid commercial models that combine a subscription platform with managed technical work. The Connected product security management market can therefore reach suppliers that require ongoing guidance rather than standalone software.
Vulnerability management and prioritization held 35.78% of the Connected product security management market share in 2026. A current asset inventory and an accurate mapping of vulnerabilities to software components are necessary before a manufacturer can prioritize remediation. Product teams use this information to determine which releases are affected and whether the product is exposed in a customer environment. The segment benefits from familiarity with comparable processes in enterprise security. It becomes more complex for connected products because components may be embedded in firmware and shipped across long product life cycles. A current view supports internal risk reporting and customer communications. It also enables a manufacturer to make decisions based on the actual device configuration rather than generic vulnerability alerts. It gives engineering teams a consistent basis for security decisions across supported device versions.
Software bills of materials and software supply chain management are projected to grow at an 11.76% CAGR through 2032. The FDA and the EU Cyber Resilience Act have made machine-readable component information important for regulated product categories and market access. A maintained software bill of materials can support rapid correlation when a new Common Vulnerabilities and Exposures notice is published. This enables manufacturers to identify affected products more quickly than a manual investigation across product records. Asset discovery and inventory, product risk and security governance, and compliance evidence management support the other stages of the lifecycle. The Connectivity Standards Alliance documented increasing use of cybersecurity standards, policies, and certification schemes for consumer IoT devices in 2025. These functions make security evidence a usable operational record instead of a static release document. They also help the Connected product security management market support procurement, engineering, and compliance teams from the same evidence base.
Complete Report Scope:
- By Offering
- Solutions
- Services
- By Security Function
- Product Asset Discovery and Inventory
- SBOM and Software Supply-Chain Management
- Vulnerability Management and Prioritization
- Product Risk and Security Governance
- Regulatory Compliance and Evidence Management
- Other Security Functions
- By Deployment
- Cloud
- On-Premises
- Hybrid
- By Organization Size
- Large Enterprises
- Small and Medium-Sized Enterprises
- By End-User Industry
- Industrial Manufacturing
- Automotive and Mobility
- Healthcare and Medical Devices
- Consumer Electronics and Smart Devices
- Energy and Utilities
- Aerospace, Defense and Government Technology
- Other End-User Industries
- By Geography
- North America
- United States
- Canada
- Mexico
- South America
- Brazil
- Argentina
- Rest of South America
- Europe
- Germany
- United Kingdom
- France
- Italy
- Russia
- Rest of Europe
- Asia-Pacific
- China
- Japan
- India
- South Korea
- Rest of Asia-Pacific
- Middle East
- Saudi Arabia
- United Arab Emirates
- Rest of Middle East
- Africa
- South Africa
- Nigeria
- Rest of Africa
- North America
Geography Analysis
North America accounted for 37.44% of the connected product security management market revenue in 2026. FDA requirements for cyber devices place software bill-of-materials documentation within the premarket submission process, while federal procurement policy strengthens the business case for connected-device security. NIST published IR 8259 Rev. 1 in April 2026 and described foundational cybersecurity activities for IoT product manufacturers. Demand is concentrated among defense contractors, medical device manufacturers, and industrial original equipment manufacturers, while smaller suppliers increasingly respond to customer requirements.Europe represented the second-largest revenue share in 2026. The EU Cyber Resilience Act creates a clear timetable for incident reporting and future conformity requirements for products with digital elements. Germany, France, and the United Kingdom are important markets because they combine connected-device manufacturing with export activity. The reporting requirements that took effect in September 2026 created immediate demand for processes that identify, assess, and report actively exploited vulnerabilities. The December 2027 conformity deadline increases the importance of software bill-of-materials management, controlled vulnerability handling, and evidence that works across supply networks.
Asia-Pacific is projected to expand at a 12.10% CAGR through 2032. The region’s high device production volumes increase the number of manufacturers that need product security processes. Japan’s Ministry of Economy, Trade, and Industry guidance influences automotive and electronics manufacturers, while Singapore’s Cybersecurity Labeling Scheme has a mutual recognition arrangement with South Korea’s KISA certification program. India’s Digital Personal Data Protection Act and China’s Data Security Law support investment in manufacturing and industrial IoT applications. Export exposure is decisive because regional producers must meet European and U.S. product-security requirements to sell into those destination markets.
List of Companies Covered in this Report:
- Armis, Inc.
- Claroty Ltd.
- Forescout Technologies, Inc.
- Nozomi Networks, Inc.
- Dragos, Inc.
- Ordr, Inc.
- Phosphorus Cybersecurity Inc.
- Cybellum Technologies Ltd.
- Finite State, Inc.
- ONEKEY GmbH
- Karamba Security Ltd.
- Secure-IC S.A.S.
- Sternum Ltd.
- Mocana Corporation
- Keyfactor, Inc.
- MagicCube, Inc.
- Particle Industries, Inc.
- Secure Elements Private Limited
- RIoT Secure AB
- ArgusEye, Inc.
Additional Benefits:
- The market estimate (ME) sheet in Excel format
- 3 months of analyst support
Table of Contents
Companies Mentioned (Partial List)
A selection of companies mentioned in this report includes, but is not limited to:
- Armis, Inc.
- Claroty Ltd.
- Forescout Technologies, Inc.
- Nozomi Networks, Inc.
- Dragos, Inc.
- Ordr, Inc.
- Phosphorus Cybersecurity Inc.
- Cybellum Technologies Ltd.
- Finite State, Inc.
- ONEKEY GmbH
- Karamba Security Ltd.
- Secure-IC S.A.S.
- Sternum Ltd.
- Mocana Corporation
- Keyfactor, Inc.
- MagicCube, Inc.
- Particle Industries, Inc.
- Secure Elements Private Limited
- RIoT Secure AB
- ArgusEye, Inc.

