North America Wind Tower Market Trends and Insights
U.S. Domestic-Content Incentives and Local Tower Capacity Expansion
Projects beginning construction in 2026 must meet a 50% domestic-content threshold to qualify for the relevant bonus credit, and the threshold rises to 55% for 2027 projects. Towers carry substantial structural value, so local fabrication can determine whether a developer can meet that threshold. The North America Wind Tower Market benefits when domestic suppliers can provide certified sections without disrupting project schedules. CS Wind’s Pueblo facility has targeted an annual output of 10,000 tower sections by 2028, compared with 3,000 sections before its expansion. Arcosa disclosed that it converted an idled tower plant to utility-pole production and planned another conversion in 2027, which shows that available tower capacity can change quickly. The scheduled end of advanced-manufacturing credits for towers sold after 2027 narrows the period in which producers can expand with policy support.Demand for Taller Towers in Higher-Quality Wind Corridors
The North America Wind Tower Market is moving toward taller structures because greater hub heights allow projects to access stronger and more consistent wind conditions. The U.S. Department of Energy reported that the average hub height for utility-scale land-based turbines reached 103.4 m in 2023, which was 83% higher than the 1998-1999 baseline. Conventional tubular sections face road-transport limits when base diameters approach 4.3-4.6 m, making very tall designs harder to deliver to inland sites. Hybrid, modular, and composite configurations can address these logistics limits while supporting higher hub heights. DOE programs have specifically supported technology for hub heights above 120 m, which places that range at the center of current tower development. This engineering shift gives qualified manufacturers an opening to compete on design capability rather than only on conventional steel capacity.Permitting, Radar, Wildlife, and Litigation Delays
Permitting uncertainty has reduced near-term order visibility for the North America Wind Tower Market. The Department of Defense paused radar-mitigation reviews for onshore wind from August 2025, which delayed required clearance steps for projects across multiple states. A federal court in Oregon ordered the Department of Defense to lift the review freeze in August 2026. A Massachusetts court also issued a preliminary injunction in April 2026 against certain heightened federal permitting requirements. Eagle-take permitting resumed in January 2026 after a 12-month suspension, which may allow stalled siting work to proceed. The backlog may clear over several years because radar, wildlife, and other approvals are separate stages of project development.Other drivers and restraints analyzed in the detailed report include:
- Repowering of Aging Onshore Fleets
- Offshore Wind Procurement and Port Investment
- Heavy-Plate Steel Price Volatility
Segment Analysis
Tubular steel towers held 76.3% of the North America Wind Tower Market share in 2026, confirming their place as the standard option for most active projects. Their lead reflects established fabrication plants, erection practices, inspection processes, and use across the Great Plains, Midwest, and Canadian Prairies. The design remains cost-effective for conventional hub heights and can fit existing project logistics. The North America Wind Tower Market continues to rely on tubular steel because many planned onshore projects do not require taller or more complex structures. Arcosa and CS Wind have prepared production capability for sections that support designs above 120 m, which shows that the format can still adapt. Lattice towers serve narrower uses at remote or lower-wind locations, while standalone concrete towers remain less common in the region.Hybrid towers are forecast to post a 9.8% CAGR through 2032, the highest rate among tower types. They use prefabricated concrete lower sections and steel upper sections to reduce transport limits associated with large tubular bases. This approach can support hub heights above 120 m at inland locations where road dimensions constrain conventional steel sections. A 2026 comparison found that steel-concrete hybrid designs can reduce greenhouse-gas emissions per unit of structural performance at a 165 m case hub height. Hybrid solutions therefore address both project logistics and structural requirements for taller turbines. Their adoption depends on whether developers can manage on-site assembly, concrete work, and scheduling without losing the cost advantages of the design.
Steel represented 82.1% of material consumption in 2026 and remained the core input for the North America Wind Tower Market. Established welding capacity, domestic-content considerations, and well-developed supply chains support its continued use. Steel towers have a known certification and maintenance base, which reduces execution risk for utilities and developers. Qualified fabricators can use existing processes for a large share of onshore requirements. ISO welding qualifications and tower design standards still require careful production control, so steel’s established supply chain does not remove barriers for new producers. The material’s position also reflects the high volume of conventional onshore projects that use proven tubular structures.
Composite materials are forecast to grow at a 10.2% CAGR through 2032, the fastest pace within the material classification. Glass- and carbon-fiber sections can lower weight while maintaining the strength needed for very tall upper sections. They can also reduce the need for some marine coating cycles in offshore settings. Composite materials are most relevant when weight, fatigue performance, and transport limitations make conventional steel less attractive. Concrete keeps a stable role through hybrid structures, particularly where lower sections can be produced or assembled near the project site. The North America Wind Tower Market may therefore use more mixed-material designs rather than move away from steel on a broad basis.
Complete Report Scope:
- By Tower Type
- Tubular Steel Towers
- Concrete Towers
- Lattice Towers
- Hybrid Towers
- Other Tower Types
- By Material
- Steel
- Concrete
- Composite Materials
- Hybrid Materials
- By Deployment
- Onshore
- Offshore
- By Height
- Up to 80 m
- 81 to 120 m
- 121 to 160 m
- Above 160 m
- By End User
- Utilities
- Independent Power Producers
- Government Agencies
- Commercial and Industrial Users
- By Geography
- United States
- Canada
- Mexico
List of Companies Covered in this Report:
- Arcosa Wind Towers, Inc.
- Broadwind, Inc.
- CS Wind Corporation
- DONGKUK S&C Co., Ltd.
- GRI Renewable Industries, S.L.
- Haizea Wind, S.L.
- Keystone Tower Systems, Inc.
- KGW Schweriner Maschinen- und Anlagenbau GmbH
- Marmen Inc.
- Pemamek Ltd.
- Rohn Products, LLC
- SENLISWELD
- Shanghai Taisheng Wind Power Equipment Co., Ltd.
- Sinoma Wind Power Blade and Tower Co., Ltd.
- SPECO Technologies Co., Ltd.
- Titan Wind Energy (Suzhou) Co., Ltd.
- US Forged Rings Inc.
- Valmont Industries, Inc.
- Ventower Industries, LLC
- Windar Renovables, S.A.
Additional Benefits:
- The market estimate (ME) sheet in Excel format
- 3 months of analyst support
Table of Contents
Companies Mentioned (Partial List)
A selection of companies mentioned in this report includes, but is not limited to:
- Arcosa Wind Towers, Inc.
- Broadwind, Inc.
- CS Wind Corporation
- DONGKUK S&C Co., Ltd.
- GRI Renewable Industries, S.L.
- Haizea Wind, S.L.
- Keystone Tower Systems, Inc.
- KGW Schweriner Maschinen- und Anlagenbau GmbH
- Marmen Inc.
- Pemamek Ltd.
- Rohn Products, LLC
- SENLISWELD
- Shanghai Taisheng Wind Power Equipment Co., Ltd.
- Sinoma Wind Power Blade and Tower Co., Ltd.
- SPECO Technologies Co., Ltd.
- Titan Wind Energy (Suzhou) Co., Ltd.
- US Forged Rings Inc.
- Valmont Industries, Inc.
- Ventower Industries, LLC
- Windar Renovables, S.A.

