North America Data Center Copper and Electrical Materials Market Trends and Insights
AI And High-Performance Computing Rack Density Expansion
Current Blackwell systems use 120 kW racks, compared with 10-20 kW for conventional CPU racks. A 120 kW rack contains more than 300 kg of copper, which equals 3 metric tons per MW of copper intensity. The Copper Development Association reported that hyperscale AI campuses can require up to 50,000 metric tons of copper per site, compared with 5,000-15,000 metric tons at conventional facilities. The North America data center copper and electrical materials market benefits because each layer of a high-density installation needs conductors, connections, and protection equipment. NVIDIA is developing an 800 VDC ecosystem for AI factories, which supports higher-voltage distribution while keeping the focus on campus-scale electrical capacity. NFPA 70 establishes the electrical installation framework that applies to conductor sizing, grounding, and protection for these deployments.Hyperscale And Colocation Campus Expansion
Large campus construction creates demand for cable, busway, connectors, and copper feedstock before equipment reaches the white space. The Copper Development Association cited 11.6 metric tons of copper per MW across power and cooling systems for new primary-market capacity. The North America data center copper and electrical materials market therefore gains when development moves toward greenfield sites with complete utility and onsite electrical installations. These projects require new incoming cables, substations, distribution rings, backup equipment, and grounding systems. The shift toward locations such as West Texas, Alberta, and Pennsylvania increases the amount of infrastructure installed from the utility interconnect inward. This favors suppliers that can support a project through fabrication, delivery, and field installation without lengthy equipment lead times.Copper Price And Refining-Supply Volatility
LME copper averaged USD 13,395 per metric ton in 2026, 35% above the 2025 average. Copper prices rose by one-third between January 2025 and April 2026, while supply deficits are expected to persist through 2035. Higher prices affect tender validity, project repricing, and escalation risk on multiyear campus programs. The North America data center copper and electrical materials market remains exposed because cable and busway contracts commonly reflect commodity prices. The International Energy Agency reported that new projects in the Democratic Republic of the Congo and Zambia reduced the projected 2035 copper supply deficit from 30% to 25%. Cable manufacturers are responding with forward purchasing and hedging programs, although those approaches require more working capital.Other drivers and restraints analyzed in the detailed report include:
- Grid Connection And Onsite Power Buildout
- Liquid Cooling And Copper-Intensive Thermal Infrastructure
- Utility Interconnection And Energization Delays
Segment Analysis
Copper held 71.56% of the market share in 2026. Copper is used in everything from incoming utility cables to the microchannels within liquid-cooling cold plates. The Copper Development Association reported that hyperscale AI campuses can require up to 50,000 metric tons of copper. Power distribution, thermal management, grounding, and bonding each add to its use at a large site. NFPA 70 provides the code framework for conductor ampacity and installation practices in these applications. Copper therefore retains an important position where conductivity, thermal performance, and reliability requirements are strict.Aluminum is projected to expand at a 9.59% CAGR through 2032 within the North America data center copper and electrical materials market. It is gaining use in secondary busway runs and large-conductor feeders where installed cost and weight are more important than conductivity density. Aluminum busway can be suited to 400 A to 1,250 A backbone distribution runs in grey-space areas. Copper remains preferred in performance-critical primary distribution paths and dense cooling equipment. Designers must also manage galvanic corrosion at copper-aluminum junctions. This division makes purchasing decisions sensitive to the spread between copper and aluminum prices as well as site-specific electrical requirements.
Electrical cables and conductors held 39.81% of the market share in 2026. They are used throughout the electrical path from utility connections to rack-level drops. Medium-voltage cable serves facilities that take power at transmission voltage and step it down on-site. Prysmian has invested USD 500 million in expanding the Encore Wire campus in McKinney, Texas, including medium-voltage cable production. The company also approved a second copper rod mill at the same campus in 2026 to support cable feedstock demand. Connectors and terminations remain smaller categories, but higher-voltage direct current systems raise their performance and protection requirements.
Busbars and busways are projected to expand at a 9.23% CAGR through 2032. These systems replace traditional whip-cabling arrangements with modular overhead distribution in high-density AI rows. Vertiv launched its Double-Stack PowerBar Track in October 2024 with ratings up to 2,000 A under UL and 2,500 A under IEC. The product format allows rack-level power additions without running new home circuits from the main distribution board. Cable trays, conduit, and wiring accessories also rise with the physical footprint of new facilities. The North America data center copper and electrical materials market is consequently moving toward modular systems that speed changes inside grey-space environments.
Complete Report Scope:
- By Material Type
- Copper
- Aluminum
- Other Electrical Conductive Materials
- By Product Type
- Electrical Cables and Conductors
- Busbars and Busways
- Copper Rods and Strips
- Electrical Connectors and Termination Materials
- Other Electrical Materials
- By Application
- Power Distribution
- Power Backup Systems
- Grid Connection and Electrical Infrastructure
- Grounding and Bonding
- Other Electrical Applications
- By Data Center Size
- Small
- Medium
- Large
- Hyperscale
- By Data Center Type
- Colocation
- Cloud Service Providers (CSPs)
- Enterprise / Edge
- By Country
- United States
- Canada
- Mexico
List of Companies Covered in this Report:
- ABB Ltd
- Amphenol Corporation
- Belden Inc.
- Nexans S.A.
- Eaton Corporation plc
- EAE ELECTRIC
- Encore Wire Corporation
- Furukawa Electric Co., Ltd.
- Hubbell Incorporated
- Legrand SA
- LS Cable & System Ltd.
- Molex LLC
- nVent Electric plc
- Panduit Corporation
- Prysmian S.p.A.
- Schneider Electric SE
- Siemens AG
- Southwire Company, LLC
- Sumitomo Electric Industries, Ltd.
- TE Connectivity Ltd.
- Vertiv Holdings Co
- Atkore International Group, Inc.
Additional Benefits:
- The market estimate (ME) sheet in Excel format
- 3 months of analyst support
Table of Contents
Companies Mentioned (Partial List)
A selection of companies mentioned in this report includes, but is not limited to:
- ABB Ltd
- Amphenol Corporation
- Belden Inc.
- Nexans S.A.
- Eaton Corporation plc
- EAE ELECTRIC
- Encore Wire Corporation
- Furukawa Electric Co., Ltd.
- Hubbell Incorporated
- Legrand SA
- LS Cable & System Ltd.
- Molex LLC
- nVent Electric plc
- Panduit Corporation
- Prysmian S.p.A.
- Schneider Electric SE
- Siemens AG
- Southwire Company, LLC
- Sumitomo Electric Industries, Ltd.
- TE Connectivity Ltd.
- Vertiv Holdings Co
- Atkore International Group, Inc.

