Global Automotive Motor Lamination Market Trends and Insights
Global Electrified-Vehicle Motor Production Expansion
Electric-vehicle motor production is increasing the addressable volume for precision motor cores. The GEM Detroit Region projects U.S. e-motor output will rise from 3.2 million units in 2024 to 14.1 million units by 2030. It also expects e-motors to account for 61% of U.S. vehicle output by 2030 . This expansion supports the automotive motor lamination market because each traction motor requires a stator and rotor core set. The opportunity is narrower for independent suppliers where vehicle makers retain or build captive drive-unit capacity. Local production investments can therefore expand core demand while also intensifying competition for third-party nominations. The practical result is that capacity growth does not automatically translate into equal access for all lamination suppliers. Companies that already meet program quality and timing requirements are better positioned to receive the resulting work.Higher Motor Speed and Power Density Requirements
Traction motors operating above 15,000 rpm require electrical steel with controlled core loss at higher frequencies. This raises the value of stamping accuracy, stack geometry, and joining quality for hairpin motor programs. RWTH Aachen University reports that hairpin stator lines run at 150,000 to 200,000 units per year, with continuous hairpin processes reaching mechanical slot fill factors of up to 90% . A 2025 IEEE review identifies lamination stack geometry as a constraint on further efficiency gains in continuous hairpin winding . The automotive motor lamination market therefore favors suppliers that work with motor engineers early in program development. Early technical involvement also gives a supplier time to align die design, material behavior, insulation needs, and stack tolerances before production begins. This reduces the risk that a core design will need costly changes after a vehicle program is approved. Feintool states that its glulock technology supports laminations as thin as 0.1 mm and can improve motor efficiency by up to 15% within the same motor envelope.Volatility and Limited Availability of High-Grade Non-Grain-Oriented Electrical Steel
High-grade NGO electrical steel remains a material constraint for suppliers serving electric-drive programs. The requirement for low core loss and thin gauges limits the number of suitable steel grades for high-speed motors. The IEC 60034-30-1:2025 IE5 efficiency class adds a compliance factor that favors premium electrical steel. Price changes in silicon and alloy inputs also affect the economics of supply agreements when contracts allow material pass-through. New capacity in Germany, France, and the United States can improve regional availability but does not remove the need for qualified grades. The automotive motor lamination market is exposed when limited material supply constrains production schedules or narrows supplier margins. This is especially relevant where a motor program depends on a qualified steel grade and cannot readily switch materials without renewed testing. It increases the value of long-term material relationships and supply planning.Other drivers and restraints analyzed in the detailed report include:
- Shift Toward Thinner Non-Grain-Oriented Electrical Steel
- Rising Auxiliary-Motor Content per Vehicle
- Capital Intensity of Progressive Dies, High-Speed Presses, and Inspection Systems
Segment Analysis
Non-grain-oriented silicon steel accounted for 66.63% of the automotive motor lamination market share in 2026. Its position reflects an established balance of performance, cost, and compatibility with high-speed progressive-die stamping. The material serves a range of auxiliary and traction motor applications. Cobalt alloys remain concentrated in extreme-performance uses that require saturation magnetization above 2.3 T. Nickel alloys are the fastest-growing material segment at a 12.78% CAGR through 2032. Their use is linked to 800 V traction motors where standard NGO steel can face unacceptable eddy-current losses.The material mix is becoming more specialized as motor speed and power density increase. A 0.10 mm B10AHV900M ultra-thin grade was introduced for traction motors above 15,000 rpm in May 2025, indicating the direction of material development. Thin grades can improve high-frequency performance but require capable stamping and joining processes. This makes material selection a manufacturing decision as well as a motor-design decision. A grade that performs well magnetically must also run reliably through the die, insulation, stacking, and handling steps. Suppliers need to assess both considerations before committing to a production method. The automotive motor lamination industry has opportunities in premium applications where grade qualification and processing know-how are decisive. Standard NGO grades are likely to remain the largest-volume option because they meet broad application requirements at a workable cost.
The 0.2-0.35 mm band held 61.26% of the automotive motor lamination market share in 2026. This gauge range remains a common engineering choice for current traction motors and premium auxiliary systems. It balances manageable processing with core-loss performance. Less than 0.2 mm is the fastest-growing thickness segment, with a 13.05% CAGR through 2032, as high-speed traction designs adopt ultra-thin grades. More than 0.35 mm remains relevant for lower-speed auxiliary motors where standard gauges are suitable.
The thickness mix does not move in one direction across all motor types. HVAC systems, pumps, and cooling fans add core volume that can continue to use thicker gauges. Thin material has a higher risk of yield loss during stamping, especially for complex geometries. Feintool states that its adhesive-based process allows series production at 0.1 mm and can improve efficiency by up to 15%. This makes adhesive joining a practical route for the thin-gauge part of the automotive motor lamination market. Suppliers need to manage scrap and tooling life while meeting the tighter tolerances required by these grades.
Stamping accounted for 78.73% of the automotive motor lamination market share in 2026 and is forecast to grow at a 13.01% CAGR through 2032. Its lead reflects the scale and repeatability of progressive-die production. A new motor design generally requires a dedicated die set. Re-sourcing during production is difficult after a process has been validated by an OEM. Laser cutting and other methods serve prototypes and low-volume applications where dedicated die investment is not justified.
Stamping increasingly includes bonding as part of the production process rather than a separate downstream activity. Worthington Steel’s Tempel introduced FSB Full Surface Bonding in October 2025. The company says the process applies adhesive at 2-4 microns compared with 5-14 microns in conventional bonding and has received production approval at multiple automotive OEMs. This improves the relevance of high-volume stamping for quiet and efficient motor designs. The automotive motor lamination market rewards suppliers that combine tooling expertise with process control for adhesive application. Cost-effective prototype methods will remain necessary, but they do not challenge stamping’s high-volume position.
Complete Report Scope:
- By Material
- Silicon Steel (Non-Grain Oriented)
- Cobalt Alloys
- Nickel Alloys
- Others
- By Lamination Thickness
- Less than 0.2 mm
- 0.2-0.35 mm
- More than 0.35 mm
- By Cutting Process
- Stamping
- Laser Cutting and Others
- By Stacking Method
- Interlocking
- Bonding
- Self-Bonding
- Glue
- Welding
- Others
- By Motor Type
- Traction Motors
- Auxiliary Motors
- Electric Power Steering
- Pumps
- Cooling Fans
- HVAC Compressors
- Others
- By Component
- Stator Lamination
- Rotor Lamination
- By Vehicle Type
- Battery Electric
- Hybrid and Plug-in Hybrid
- ICE
- By Geography
- North America
- United States
- Canada
- Mexico
- South America
- Brazil
- Argentina
- Rest of South America
- Europe
- Germany
- Italy
- France
- United Kingdom
- Spain
- Russia
- Rest of Europe
- Asia-Pacific
- China
- Japan
- South Korea
- India
- Thailand
- Indonesia
- Rest of Asia-Pacific
- Middle East and Africa
- Turkey
- Saudi Arabia
- United Arab Emirates
- South Africa
- Rest of Middle East and Africa
- North America
Geography Analysis
North America held 21.46% of the automotive motor lamination market share in 2026. The region is supported by established OEM assembly activity and an increasing focus on domestic electrical steel sourcing. The GEM Detroit Region projects U.S. e-motor output will increase from 3.2 million units in 2024 to 14.1 million units by 2030. ArcelorMittal’s USD 1.2 billion Calvert, Alabama electrical steel line, with up to 150,000 tons of annual capacity, remains under construction, with first production expected in the second half of 2027. Regional supply can reduce dependence on imported NGO grades and improve sourcing choices for stampers. Worthington Steel’s Tempel is expanding its Apodaca, Mexico operation for traction-motor laminations serving USMCA vehicle programs. Program timing remains important because the company expects the full production ramp to extend to fiscal 2029. Local-for-local capacity and automotive quality systems will remain central to the automotive motor lamination market in this region.Asia-Pacific held 47.83% of the automotive motor lamination market share in 2026, the largest regional share, and is forecast to grow at a 13.28% CAGR through 2032, making it the fastest-growing regional segment of the automotive motor lamination market. China provides the principal production base, while India, South Korea, and Thailand add manufacturing depth. This scale supports demand for traction cores but also encourages captive drive-unit supply chains. India is expanding its stamping base. Feintool opened its first Indian plant in Pune in July 2026, with series production scheduled from Q1 2027 and later expansion into e-motor cores. Japan remains an important technology center in electrical steel development and bonded-core intellectual property. The automotive motor lamination market in Asia-Pacific combines large vehicle output with rapid progress in local materials and forming capacity.
Europe has a technology-led automotive motor lamination market, while South America and Middle East and Africa remain smaller and more import-dependent. thyssenkrupp Steel’s Bochum line supports thin NGO grades for electric-mobility applications, strengthening Europe’s material base. POSCO International started mass production in Brzeg, Poland, in December 2025, with annual capacity for 1.2 million motor cores and an initial order for 1.03 million units for Hyundai and Kia in Europe. Feintool expanded its Tokod, Hungary plant with a EUR 34.1 million investment to supply e-motor components for Volvo’s electric vehicles. European producers need to meet automotive quality requirements and product-carbon documentation, including ISO 14067 where requested by customers. Brazil supports ICE and hybrid auxiliary-motor demand through its OEM assembly base, while localized EV traction-core manufacturing remains limited. Turkey, Saudi Arabia, and the UAE contribute incremental demand through vehicle-assembly plans, but their lamination supply remains largely imported.
List of Companies Covered in this Report:
- EuroGroup Laminations S.p.A.
- Mitsui High-tec, Inc.
- Worthington Steel, Inc.
- POSCO International Corporation
- R. Bourgeois S.A.
- Sumitomo Electric Industries, Ltd.
- voestalpine AG
- JFE Steel Corporation
- Nippon Steel Corporation
- thyssenkrupp AG
- China Baowu Steel Group Corporation Limited
- Kuroda Precision Industries Ltd.
- Motherson Yutaka Giken Co., Ltd.
- Pitti Engineering Pvt. Ltd.
- Polaris Laser Laminations
- Wingard & Co., Inc.
- Lamination Specialties, Inc.
- Suzhou Fine-Stamping Co., Ltd.
- Brandauer Limited
- Feintool International Holding AG
Additional Benefits:
- The market estimate (ME) sheet in Excel format
- 3 months of analyst support
Table of Contents
Companies Mentioned (Partial List)
A selection of companies mentioned in this report includes, but is not limited to:
- EuroGroup Laminations S.p.A.
- Mitsui High-tec, Inc.
- Worthington Steel, Inc.
- POSCO International Corporation
- R. Bourgeois S.A.
- Sumitomo Electric Industries, Ltd.
- voestalpine AG
- JFE Steel Corporation
- Nippon Steel Corporation
- thyssenkrupp AG
- China Baowu Steel Group Corporation Limited
- Kuroda Precision Industries Ltd.
- Motherson Yutaka Giken Co., Ltd.
- Pitti Engineering Pvt. Ltd.
- Polaris Laser Laminations
- Wingard & Co., Inc.
- Lamination Specialties, Inc.
- Suzhou Fine-Stamping Co., Ltd.
- Brandauer Limited
- Feintool International Holding AG

