+353-1-416-8900REST OF WORLD
+44-20-3973-8888REST OF WORLD
1-917-300-0470EAST COAST U.S
1-800-526-8630U.S. (TOLL FREE)
New

North America Data Center Emergency Power and Resilience - Market Share Analysis, Industry Trends & Statistics, Growth Forecasts (2027-2032)

  • PDF Icon

    Report

  • 183 Pages
  • November 2026
  • Region: North America
  • Mordor Intelligence
  • ID: 6294770
The North America data center emergency power and resilience market size was valued at USD 5.87 billion in 2026 and is estimated to grow from USD 6.68 billion in 2027 to reach USD 11.86 billion by 2032, at a CAGR of 12.17% during the forecast period (2027-2032). This report is Segmented by Equipment Type (Backup Generators, and More), Power Capacity (Below 1 MW, and More), Backup Power Technology (Diesel-Based Systems, and More), Service Type (Installation, and More), Data Center Size (Small, Medium, and More), Data Center Type (Colocation, and More), and Geography. The Market Forecasts are Provided in Terms of Value (USD).

North America Data Center Emergency Power and Resilience Market Trends and Insights

Hyperscale AI and High-Density Compute Expansion

U.S. data center additions of 13.6 GW in 2026 and 36.3 GW in 2027 increase the need to secure power equipment early in the construction cycle. AI racks drawing 200 kW to 1 MW require resilience systems that can handle sharp changes in demand. These changes favor layered configurations that combine UPS capacity, batteries, controls, and generation rather than relying only on larger engines. The North America data center emergency power and resilience market therefore has a wider opening for storage and power-quality suppliers that traditionally served narrower portions of a facility electrical system. A 2025 International Energy Agency assessment stated that grid constraints could delay a meaningful share of planned data center projects, which supports the use of self-sufficient power systems during early operations.

Grid Interconnection Delays and Onsite Power as a Bridge to Energization

Grid connection delays are making bridge power a practical way to bring a completed facility online before permanent utility service is available. Conduit Power and Prometheus Hyperscale announced a hybrid gas-generation-and-battery approach that can be scaled to 300 MW per site in Texas. The configuration can later support demand response after the grid connection is secured, improving the economic use of installed backup assets. The North America data center emergency power and resilience market benefits because power systems are being specified earlier, at greater scale, and with a broader operating role. Schneider Electric has outlined prime-power approaches that enable data center projects to pursue greater grid independence as utility connections are developed.

High Upfront Capital Cost and Retrofit Complexity

High-density backup systems require generation, paralleling switchgear, fuel systems, automatic transfer equipment, cooling, and civil work. Those requirements can exceed the financial capacity of mid-sized colocation operators and enterprise sites. Older facilities also need structural changes and expanded equipment rooms before they can host higher-density AI loads. Long supplier backlogs require deposits well before revenue is realized, which places additional pressure on project returns. Caterpillar reported a USD 72.1 billion firm backlog at the close of Q2 2026, with USD 29.2 billion not expected to ship within 12 months. The North America data center emergency power and resilience market consequently has different purchasing conditions for well-funded hyperscalers and smaller operators.

Other drivers and restraints analyzed in the detailed report include:

  1. Extreme-Weather Exposure and Reliability-Centered Resilience Spending
  2. Digital Sovereignty and Regional Colocation Expansion
  3. Emissions Permitting and Runtime Restrictions for Fossil Backup

Segment Analysis

Backup generators held 36.71% of the North America data center emergency power and resilience market share in 2026 because they provide multi-hour operation at full load. Their role remains important where the facility must operate through a sustained grid outage. Caterpillar and Cummins continue to benefit from the demand for large-scale standby generation. Schneider Electric introduced the Galaxy VXL in 2026, offering up to 1.25 MW of output in a single frame, signaling a shift toward compact UPS designs for high-density facilities. Microgrids and onsite power systems are also attracting attention when operators need more independence from constrained utility connections.

Backup batteries are projected to record a 13.26% CAGR through 2032 in the North America data center emergency power and resilience market. They provide immediate ride-through power during generator start-up sequences, which is important when AI racks cause large, rapid load changes. Lithium iron phosphate systems are gaining relevance because they offer a stable discharge profile and stronger thermal performance than some higher-energy-density alternatives. Eaton's 800 VDC reference architecture with NVIDIA includes supercapacitors, UPS systems, and busbar distribution for AI data center designs. The approach positions storage as a core part of power quality and not only a resilience add-on.

The 20 MW and above tier accounted for 43.28% of revenue in 2026 and led the North America data center emergency power and resilience market at a 15.92% CAGR through 2032. AI campus projects increasingly require emergency power in blocks measured in hundreds of MW. Oracle's Project Jupiter was designed for up to 2.45 GW of onsite capacity, which demonstrates the scale of current power planning. Caterpillar's ProPWR framework can support up to 2.1 GW for a single hyperscale customer. Smaller capacity tiers remain relevant for enterprise, regional colocation, and edge facilities that have different budgets and redundancy needs.

Large installations require multiple generators, protection systems, metering equipment, fuel management units, automatic transfer switches, and controls. This means a larger site does not simply use one larger machine. It uses an integrated collection of equipment that increases system complexity and supplier coordination needs. The North America data center emergency power and resilience industry therefore favors manufacturers that can support multi-site and multiyear delivery frameworks. Smaller equipment makers may face a disadvantage when they cannot offer production capacity, field support, and controls integration at the same scale. These dynamics also make temporary generation and phased commissioning more relevant during construction.

Complete Report Scope:

  • By Equipment Type
    • Backup Generators
    • Uninterruptible Power Supply Systems
    • Backup Batteries
    • Automatic Transfer Switches and Switching Equipment
    • Fuel Storage and Delivery Systems
    • Microgrid and On-Site Power Systems
  • By Power Capacity
    • Below 1 MW
    • 1 MW to Below 5 MW
    • 5 MW to Below 20 MW
    • 20 MW and Above
  • By Backup Power Technology
    • Diesel-Based Systems
    • Gas-Based Systems
    • Battery-Based Systems
    • Fuel Cell and Other Emerging Systems
  • By Service Type
    • Installation and Commissioning
    • Preventive and Corrective Maintenance
    • Load Bank Testing and System Validation
    • Fuel Management and Emergency Readiness Services
    • Power Resilience Consulting and Assessment
  • By Data Center Size
    • Small
    • Medium
    • Large
    • Hyperscale
  • By Data Center Type
    • Colocation
    • Cloud Service Providers (CSPs)
    • Enterprise / Edge
  • By Country
    • United States
    • Canada
    • Mexico

List of Companies Covered in this Report:

  1. ABB Ltd.
  2. Caterpillar Inc.
  3. Cummins Inc.
  4. Delta Electronics, Inc.
  5. Eaton Corporation plc
  6. Generac Holdings Inc.
  7. GE Vernova Inc.
  8. Hitachi Energy Ltd.
  9. Kohler Co.
  10. Legrand SA
  11. Mitsubishi Electric Corporation
  12. Panasonic Holdings Corporation
  13. Piller Power Systems GmbH
  14. Rehlko LLC
  15. Rolls-Royce Power Systems AG
  16. Schneider Electric SE
  17. Siemens Energy AG
  18. Socomec Group S.A.
  19. Vertiv Holdings Co
  20. Wärtsilä Corporation

Additional Benefits:

  • The market estimate (ME) sheet in Excel format
  • 3 months of analyst support

Table of Contents

1 INTRODUCTION
1.1 Study Assumptions and Market Definition
1.2 Scope of the Study
2 RESEARCH METHODOLOGY3 EXECUTIVE SUMMARY
4 MARKET LANDSCAPE
4.1 Market Overview
4.2 Impact of Macroeconomic Factors on the Market
4.3 Market Drivers
4.3.1 Hyperscale AI and High-Density Compute Expansion
4.3.2 Grid Interconnection Delays and Onsite Power as a Bridge to Energization
4.3.3 Extreme-Weather Exposure and Reliability-Centered Resilience Spending
4.3.4 Digital Sovereignty and Regional Colocation Expansion
4.3.5 Layered Power Architectures for Higher Rack Densities
4.3.6 North American Demand-Response and Grid-Services Monetization
4.4 Market Restraints
4.4.1 High Upfront Capital Cost and Retrofit Complexity
4.4.2 Emissions Permitting and Runtime Restrictions for Fossil Backup
4.4.3 Transformer, Switchgear, and High-Voltage Equipment Lead Times
4.4.4 Battery Thermal-Runaway Risk and Fire-Code Uncertainty
4.5 Industry Value Chain Analysis
4.6 Regulatory Landscape
4.7 Technological Outlook
4.8 Porter's Five Forces Analysis
4.8.1 Bargaining Power of Suppliers
4.8.2 Bargaining Power of Buyers
4.8.3 Threat of New Entrants
4.8.4 Threat of Substitutes
4.8.5 Competitive Rivalry
5 MARKET SIZE AND GROWTH FORECASTS (VALUE)
5.1 By Equipment Type
5.1.1 Backup Generators
5.1.2 Uninterruptible Power Supply Systems
5.1.3 Backup Batteries
5.1.4 Automatic Transfer Switches and Switching Equipment
5.1.5 Fuel Storage and Delivery Systems
5.1.6 Microgrid and On-Site Power Systems
5.2 By Power Capacity
5.2.1 Below 1 MW
5.2.2 1 MW to Below 5 MW
5.2.3 5 MW to Below 20 MW
5.2.4 20 MW and Above
5.3 By Backup Power Technology
5.3.1 Diesel-Based Systems
5.3.2 Gas-Based Systems
5.3.3 Battery-Based Systems
5.3.4 Fuel Cell and Other Emerging Systems
5.4 By Service Type
5.4.1 Installation and Commissioning
5.4.2 Preventive and Corrective Maintenance
5.4.3 Load Bank Testing and System Validation
5.4.4 Fuel Management and Emergency Readiness Services
5.4.5 Power Resilience Consulting and Assessment
5.5 By Data Center Size
5.5.1 Small
5.5.2 Medium
5.5.3 Large
5.5.4 Hyperscale
5.6 By Data Center Type
5.6.1 Colocation
5.6.2 Cloud Service Providers (CSPs)
5.6.3 Enterprise / Edge
5.7 By Country
5.7.1 United States
5.7.2 Canada
5.7.3 Mexico
6 COMPETITIVE LANDSCAPE
6.1 Market Concentration
6.2 Strategic Moves
6.3 Market Share Analysis
6.4 Company Profiles (includes Global Level Overview, Market Level Overview, Core Segments, Financials as available, Strategic Information, Market Rank/Share, Products and Services, Recent Developments)
6.4.1 ABB Ltd.
6.4.2 Caterpillar Inc.
6.4.3 Cummins Inc.
6.4.4 Delta Electronics, Inc.
6.4.5 Eaton Corporation plc
6.4.6 Generac Holdings Inc.
6.4.7 GE Vernova Inc.
6.4.8 Hitachi Energy Ltd.
6.4.9 Kohler Co.
6.4.10 Legrand SA
6.4.11 Mitsubishi Electric Corporation
6.4.12 Panasonic Holdings Corporation
6.4.13 Piller Power Systems GmbH
6.4.14 Rehlko LLC
6.4.15 Rolls-Royce Power Systems AG
6.4.16 Schneider Electric SE
6.4.17 Siemens Energy AG
6.4.18 Socomec Group S.A.
6.4.19 Vertiv Holdings Co
6.4.20 Wärtsilä Corporation
7 MARKET OPPORTUNITIES AND FUTURE OUTLOOK
7.1 White-Space and Unmet-Need Assessment
7.2 2027-2032 Market Outlook

Companies Mentioned (Partial List)

A selection of companies mentioned in this report includes, but is not limited to:

  • ABB Ltd.
  • Caterpillar Inc.
  • Cummins Inc.
  • Delta Electronics, Inc.
  • Eaton Corporation plc
  • Generac Holdings Inc.
  • GE Vernova Inc.
  • Hitachi Energy Ltd.
  • Kohler Co.
  • Legrand SA
  • Mitsubishi Electric Corporation
  • Panasonic Holdings Corporation
  • Piller Power Systems GmbH
  • Rehlko LLC
  • Rolls-Royce Power Systems AG
  • Schneider Electric SE
  • Siemens Energy AG
  • Socomec Group S.A.
  • Vertiv Holdings Co
  • Wärtsilä Corporation