Global Pressure Vessel Composites Market Trends and Insights
Hydrogen Mobility and Refueling Infrastructure Expansion
Hydrogen refueling station construction creates demand for 350 bar and 700 bar composite cylinders in fixed storage and mobile distribution systems. Regulation (EU) 2023/1804 requires hydrogen refueling stations at 200 km intervals along specified Trans-European Transport Network core corridors from 2030, which provides a defined infrastructure signal for suppliers in Europe. The U.S. Department of Energy supported hydrogen infrastructure projects in 2025, including a heavy-duty truck refueling station at the Port of Texas. Each refueling site also requires cylinder packages for transporting hydrogen from production locations, so equipment demand is not limited to the station itself. FORVIA and H2 Energy expanded their arrangement in December 2025 to manufacture multiple element gas container units using European Agreement Concerning the International Carriage of Dangerous Goods by Road (ADR)-certified and Transportable Pressure Equipment Directive-certified Type III tanks. China’s hydrogen development plans and Chongqing’s 2025-2035 station plan support a larger regional equipment base.Lightweighting Requirements for Heavy-Duty Vehicles and Aerospace Platforms
Composite cylinders can reduce the mass of a cylinder set by 30%-40% compared with steel alternatives, which can improve payload capacity or help fleets meet axle requirements. This benefit supports their higher unit cost in heavy-duty applications where each vehicle carries several tanks. The U.S. Pipeline and Hazardous Materials Safety Administration issued a special permit in July 2025 for non-Department of Transportation composite overwrapped pressure vessels used in space applications, based on ISO 11119-2 requirements with stated variations. Toyoda Gosei Co., Ltd. supplied large hydrogen tanks for Hino Motors’ Hino Profia Z Fuel Cell Vehicle (FCV) truck in 2025, with 6 tanks per truck and a capacity of 200-230 L at 700 bar. Type IV systems weigh 30% less than Type III alternatives, while polymer liners avoid the hydrogen embrittlement issue associated with metallic liners. These operating benefits give the pressure vessel composites market a route into heavy trucks, aerospace systems, and other applications where weight is an operating constraint.High Carbon Fiber and Qualification Costs
Carbon fiber represents 60%-70% of the manufactured cost of a Type IV pressure vessel. The aerospace and hydrogen-grade precursor supply chain is concentrated among Japanese, German, and U.S. producers, which creates a cost floor for cylinder manufacturers. This cost structure can limit adoption in price-sensitive compressed natural gas commercial vehicle applications, especially in emerging economies. FABER INDUSTRIE SPA invested largely in forged-parts capacity and product development, as part of a wider response to supply and manufacturing costs. Full homologation against United Nations Economic Commission for Europe Regulation No. 134 or ISO 11119-3 can require burst, fatigue, fire, and environmental testing before commercial sales begin. The European Union-funded NACHIP project includes work by FABER INDUSTRIE SPA on cost-efficient hydrogen transport cylinders through optimized winding patterns and liner production methods.Other drivers and restraints analyzed in the detailed report include:
- Carbon-Fiber-Enabled Energy-Density Improvements
- Expansion of CNG and Renewable Natural Gas Fleets
- Long Certification and Qualification Cycles
Segment Analysis
Type IV pressure vessels held 42.34% of the pressure vessel composites market share in 2026 and are projected to advance at a 10.88% CAGR through 2032. Their polymer liners, low weight, and suitability for 700-bar service support their use in fuel cell electric vehicles and hydrogen distribution equipment. NPROXX introduced the AH620-70 and AH710-70 in January 2025 as large-diameter Type IV cylinders certified under United Nations Economic Commission for Europe Regulation No. 134 for heavy-duty vehicles. The certification provided a route for equipment designed specifically for trucks and buses rather than passenger cars. Automation investments by automotive suppliers also support consistent carbon fiber winding at higher production volumes.Type III pressure vessels remain relevant for hydrogen transport and heavy-duty compressed natural gas applications because metal liners can help with heat dissipation during fast filling. FORVIA and H2 Energy completed a December 2025 collaboration using certified 38-MPa Type III tanks for hydrogen trailer logistics, with an estimated 33% cost reduction against stationary trailer solutions. Type II Pressure Vessels remain established in bus and commercial vehicle fleets where weight requirements are less demanding and lower cost is important. Other designs include liner-free Type V vessels and thermoset-free architectures, which remain at an early stage. ISO 17533:2025 provides a pathway for assessing the first life extension and second life of vehicle hydrogen storage systems in stationary use, creating a future requalification option.
Complete Report Scope:
- By Product Type
- Type II Pressure Vessels
- Type III Pressure Vessels
- Type IV Pressure Vessels
- Others
- By Application
- Hydrogen Storage
- Compressed Natural Gas Storage
- Renewable Natural Gas Storage
- Chemical and Industrial Gas Storage
- Others
- By End-Use Industry
- Automotive
- Oil and Gas
- Chemical Processing
- Aerospace and Defense
- Marine
- Power Generation
- Others
- By Geography
- Asia-Pacific
- China
- India
- Japan
- South Korea
- ASEAN Countries
- Rest of Asia-Pacific
- North America
- United States
- Canada
- Mexico
- Europe
- Germany
- United Kingdom
- France
- Italy
- NORDIC Countries
- Rest of Europe
- South America
- Brazil
- Argentina
- Rest of South America
- Middle East and Africa
- Saudi Arabia
- South Africa
- Rest of Middle East and Africa
- Asia-Pacific
Geography Analysis
Asia-Pacific held 37.51% of the pressure vessel composites market share in 2026 and is projected to advance at an 11.33% CAGR through 2032. China is expanding its hydrogen station framework through GB/T 44457-2024, while regional plans in Chongqing support station construction through 2035. South Korea’s export-oriented fuel cell electric vehicle supply chain supports Type IV tank production for passenger vehicles and tube trailers. Japan adds large commercial truck tanks through Toyoda Gosei Co., Ltd. and the Toyota Mirai supply chain, while government support for 1,000 hydrogen refueling stations by 2030 provides a clearer demand outlook. India and ASEAN countries add demand through compressed natural gas fleets that use Type II and Type III designs. Suppliers with production close to regional vehicle and infrastructure programs can reduce delivery time and respond more easily to local compliance needs.The pressure vessel composites market in North America is supported by hydrogen infrastructure funding and a concentration of established cylinder producers. The U.S. Department of Energy supported USD 80.7 million in hydrogen-related projects in 2025, including USD 24.8 million for a heavy-duty truck refueling station at the Port of Texas. FORVIA received a 2025 order from a North American automotive manufacturer for Type IV storage systems in medium-duty commercial trucks, indicating movement from pilot work toward series production. Quantum Fuel Systems’ 930 bar design also positions the region as a development location for high-density hydrogen distribution. Luxfer Gas Cylinders’ consolidation of its Pomona facility into Riverside is expected to generate USD 4 million in annual savings and reflects production rationalization ahead of higher infrastructure demand.
Europe operates under the Transportable Pressure Equipment Directive, EN 17339 requirements for carbon composite hydrogen cylinders, and Alternative Fuels Infrastructure Regulation station obligations, which provide a regulatory basis for hydrogen logistics equipment. The pressure vessel composites market in Europe benefits from these shared compliance requirements. FABER INDUSTRIE participates in the NACHIP project on lower-cost hydrogen transport cylinder designs. Hexagon Composites ASA maintains gas distribution capability for compressed natural gas, renewable natural gas, and hydrogen from its European base. France’s 2025 hydrogen strategy targets 4.5 GW of electrolysis capacity by 2030, which can increase demand for storage and distribution equipment as projects proceed. South America relies mainly on compressed natural gas vehicle fleets in Brazil and Argentina, while Chile’s 2025 low-carbon hydrogen strategy could support future export storage projects. The Middle East and Africa demand is linked to Saudi industrial gases and South African mining and chemical processing, where specialty gas storage is expanding with infrastructure investment.
List of Companies Covered in this Report:
- Beijing Tianhai Industrial Co., Ltd.
- Doosan Mobility Innovation
- Everest Kanto Cylinder Limited
- FABER INDUSTRIE SPA
- FORVIA
- Hexagon Composites ASA
- ILJIN
- Lianyungang Zhongfu Lianzhong Composites Group Co., Ltd.
- Luxfer Gas Cylinders
- NPROXX
- Quantum Fuel Systems
- Steelhead Composites, Inc.
- Toyoda Gosei Co., Ltd.
- Umoe Advanced Composites
- Worthington Enterprises
Additional Benefits:
- The market estimate (ME) sheet in Excel format
- 3 months of analyst support
Table of Contents
Companies Mentioned (Partial List)
A selection of companies mentioned in this report includes, but is not limited to:
- Beijing Tianhai Industrial Co., Ltd.
- Doosan Mobility Innovation
- Everest Kanto Cylinder Limited
- FABER INDUSTRIE SPA
- FORVIA
- Hexagon Composites ASA
- ILJIN
- Lianyungang Zhongfu Lianzhong Composites Group Co., Ltd.
- Luxfer Gas Cylinders
- NPROXX
- Quantum Fuel Systems
- Steelhead Composites, Inc.
- Toyoda Gosei Co., Ltd.
- Umoe Advanced Composites
- Worthington Enterprises

