Metal Forming Market for Automotive by Technique (Roll, Stretch, Stamping, Deep Drawing, Hydroforming), Type (Hot, warm and Cold), Application (BIW, Chassis, Closure), Material (Steel, Aluminum, Magnesium), Vehicle (ICE & Electric)

Global vehicle production and growing commercial vehicle demand to fuel the metal forming market for automotive.

The metal forming market for automotive is projected to grow at a CAGR of 3.2% from 2020 to 2025, to reach USD 202.23 billion by 2025 from USD 172.56 billion in 2018. The market is projected to rise owing to key reasons such as increasing vehicle production and growing demand for commercial vehicles. On the other hand, the major factor hindering the growth of the metal forming market is the high capital cost of forming equipment.

The hydroforming market is projected to show the fastest growth by forming a technique segment.

Hydroforming is one of the most advanced forming techniques used in the automotive industry. It is generally used to manufacture hollow tube structures such as manifolds, exhaust cones, and a few suspension components. As hydroforming is comparatively expensive, it is mostly used by premium car manufacturers. Due to the increasing market share of premium car manufacturers, hydroforming is expected to grow at the fastest rate. It is an advanced technique and requires a high setup cost as well as high operating costs, because of which it is expected to have a significant market in Europe and North America.

Cold forming is estimated to be the largest market by forming type and is projected to maintain its position in the forecast period.

Cold forming is one of the most conventional manufacturing processes in which components are formed using different types of forming techniques at room temperature and do not require any additional handling and carrying. The cold-forming process is simpler than the hot forming process and does not require any additional setup cost. Hence, the overall cost of cold forming is low as compared to hot forming. Because of the advantages such as cost and low production time, cold forming is the major preference of OEMs across the globe.

Asia Oceania and North America are estimated to drive the metal forming market for automotive.

The Asia Oceania region is projected to lead the metal forming market for automotive during the forecast period owing to the large-scale vehicle production compared to other regions. According to OICA (Organisation Internationale des Constructeurs d'Automobiles), Asia Oceania contributed about 50-55% of the global vehicle production in 2019. Vehicle production in Asia Oceania has grown substantially in the last 10 years. This increase in production comes from small and mid-sized cars in China and India as these two countries have the largest population and are price-sensitive markets. With the increase in the production of vehicles, the demand for metal forming for automotive grew at a significant rate in Asia Oceania. This growth may have been derailed in 2020 owing to the COVID-19 outbreak. However, as per estimates, the Asia Oceania will witness growth in the forecast period owing to the successful containment of the virus in countries such as China, Japan, and South Korea. North America is expected to be the fastest-growing metal forming market for automotive. The North American region comprises countries with significant vehicle production such as Canada, Mexico, and the US. The US is the major contributor, i.e., it contributed around 65% of the overall vehicle production in North America in 2019. The North American metal forming market is dominated by key players such as the Tower International (US), Magna (Canada), and Kirchhoff Automotive (US).

The study contains insights provided by various industry experts. The break-up of the primaries is as follows:

By Company Type - Tier-1 - 55%, Tier-2 - 15%, and OEMs - 30%
By Designation - C level - 45 %, Director level - 34%, and Others - 21%
By Region - North America - 25%, Europe - 35%, Asia Oceania - 25%, and RoW - 15%

The key companies profiled in the study are Magna (Canada), Benteler (Germany), Tower International (UK), Toyota Boshoku (Japan), Aisin Seiki (Japan), Kirchhoff (US), CIE Automotive (Spain), Mills Products (US), VNT Automotive (Austria), Superform Aluminum (US), and Hirotec (Japan).

Research Coverage

The report covers the metal forming market for automotive. It is broadly segmented by region (Asia Pacific, Europe, North America, South America, and the Middle East and Africa), Technique type (Roll forming, Stretch forming, Stamping, Deep drawing, Hydroforming, and Others), Forming types (Cold forming, Warm forming, and Hot forming), Material Type (Steel, Magnesium, and Aluminum), Application type (BIW, Chassis, and Closures), Vehicle Type (Passenger car, LCV, Truck, and Bus), and Electric & Hybrid vehicle type (BEV, PHEV, and FCEV).

Reasons to Buy the Report:

The report provides insights with reference to the following points:

Market Size: The report gives in-depth market sizing and forecasts up to eight years with third level segmentation.
Market Development: The report provides comprehensive information about lucrative emerging markets. The report analyzes the metal forming market for automotive across regions.
Product Development/Innovation: The report gives detailed insights into R&D activities, upcoming technologies, and new product launches in the metal forming market for automotive.
Market Diversification: The report offers detailed information about untapped markets, investments, new products, and recent developments in the metal forming market for automotive.
Companies profiled: The report provides detailed information and in-depth analysis of key players of metal forming market for automotive based on their business strategy excellence and strength of product portfolio.

1 Introduction

1.1 Objectives of the Study
1.2 Market Definition
1.3 Market Scope
1.3.1 Markets Covered
Figure 1 Market Segmentation: Metal Forming Market for Automotive
1.3.2 Years Considered for the Study
1.4 Package Size
1.5 Limitations
1.6 Stakeholders

2 Research Methodology

2.1 Research Data
Figure 2 Metal Forming Market for Automotive: Research Design
Figure 3 Research Design Model
2.2 Secondary Data
2.2.1 Key Secondary Sources for Vehicle Production
2.2.2 Key Secondary Sources for Market Sizing
2.2.3 Key Data from Secondary Sources
2.3 Primary Data
Figure 4 Breakdown of Primary Interviews
2.3.1 Sampling Techniques & Data Collection Methods
2.3.2 Primary Participants
2.4 Market Size Estimation
2.4.1 Bottom-Up Approach
Figure 5 Metal Forming Market for Automotive: Bottom-Up Approach
2.4.2 Top-Down Approach
Figure 6 Metal Forming Market for Automotive, by Metal: Top-Down Approach
2.5 Market Breakdown and Data Triangulation
Figure 7 Data Triangulation
2.6 Assumptions

3 Executive Summary

Figure 8 Metal Forming Market for Automotive: Market Outlook
Figure 9 Covid-19 Impact on Metal Forming Market for Automotive
Figure 10 Metal Forming Market for Automotive, by Region, 2020 Vs. 2025 (USD Billion)
Figure 11 Core Competency, by Company

4 Premium Insights

4.1 Attractive Opportunities in Metal Forming Market for Automotive
Figure 12 Trend of Vehicle Light Weighting to Drive Metal Forming Market for Automotive
4.2 Metal Forming Market for Automotive, by Forming Type
Figure 13 Cold Forming Segment to Dominate Over the Forecast Period (USD Billion)
4.3 Metal Forming Market for Automotive, by Technique
Figure 14 Stamping to Be Dominant Metal Forming Technique Over the Forecast Period (USD Billion)
4.4 Metal Forming Market for Automotive, by Material
Figure 15 Steel to Be Largest Material Market Over the Forecast Period (USD Billion)
4.5 Metal Forming Market for Automotive, by Application
Figure 16 Biw to Dominate As Metal Forming Application Over the Forecast Period (USD Billion)
4.6 Metal Forming Market for Automotive, by Vehicle Type
Figure 17 Passenger Cars to Hold Largest Market Share Over the Forecast Period (USD Billion)
4.7 Metal Forming Market for Automotive, by Electric & Hybrid Vehicle
Figure 18 Bev Estimated to Lead the Market Over the Forecast Period (USD Billion)

5 Market Overview

5.1 Introduction
5.2 Market Dynamics
Figure 19 Metal Forming Market for Automotive: Market Dynamics
Table 1 Impact Analysis: Metal Forming for Automotive Market Dynamics
5.2.1 Drivers
5.2.1.1 Rising Global Vehicle Production and Growing Commercial Vehicle Demand
Figure 20 Global Vehicle Production, by Vehicle Type, 2020-2025 (Million Units)
5.2.1.2 Stringent Emission and Fuel Economy Regulations for Lightweight Materials
Figure 21 Global Emission Regulations, by Country, 2014-2025
5.2.2 Restraints
5.2.2.1 Increasing Usage of Composites in Automotive Applications
Table 2 Us: Future Weight Reduction Targets, by Component, 2025 Vs. 2050
Table 3 Plastic Use in Vehicles
5.2.3 Opportunity
5.2.3.1 Growing Sales of Electric and Hybrid Vehicles
Figure 22 Bev & Hev Sales: 2018 Vs. 2020 Vs. 2025
5.2.3.2 Increasing Adoption of Hydroforming Techniques
5.2.4 Challenges
5.2.4.1 High Capital Investments for New Entrants to Set Up Metal Forming Process
5.3 Ecosystem Analysis
Figure 23 Metal Forming Market for Automotive: Ecosystem
5.4 Covid-19 Impact on Metal Forming Market
Figure 24 Metal Forming Market for Automotive: Pre-Covid-19 Vs. Post-Covid -19

6 Technological Overview

6.1 Introduction
6.2 Advantages of Metal Forming Techniques Over Other Techniques
6.3 Types of Forming Techniques
6.3.1 Roll Forming
Figure 25 Roll Forming Process
6.3.2 Stretch Forming
Figure 26 Stretch Forming Process
6.3.3 Deep Drawing
Figure 27 Deep Drawing Process
6.3.4 Stamping
Figure 28 Stamping Process
6.3.5 Hot Forming
Figure 29 Hot Forming Process
6.3.6 Hydroforming
Figure 30 Hydroforming Process
6.4 Hydroforming: the Future of Automotive Forming
6.4.1 Advantages of Hydroforming
6.5 Additive Manufacturing
6.5.1 Advantages of Additive Manufacturing
6.5.2 Disadvantages of Additive Manufacturing

7 Metal Forming Market for Automotive, by Technique

7.1 Introduction
Figure 31 Metal Forming Market for Automotive, by Technique, 2020 Vs. 2025 (USD Billion)
Table 4 Metal Forming Market for Automotive, by Technique, 2017-2025 (Million Ton)
Table 5 Metal Forming Market for Automotive, by Technique, 2017-2025 (USD Billion)
7.1.1 Research Methodology
7.1.2 Assumptions
Table 6 Assumptions: by Technique
7.1.3 Key Primary Insights
Figure 32 Key Primary Insights
7.2 Roll Forming
7.2.1 Highest Vehicle Production Will Drive Asia Oceania’S the Market for Roll Forming
Table 7 Roll Forming: Metal Forming Market for Automotive, by Region, 2017-2025 (Million Ton)
Table 8 Roll Forming: Metal Forming Market for Automotive, by Region, 2017-2025 (USD Billion)
7.3 Stretch Forming
7.3.1 Low Cost of Stretch Forming Process Drives Price-Sensitive Asia Oceania Market
Table 9 Stretch Forming: Metal Forming Market for Automotive, by Region, 2017-2025 (Million Ton)
Table 10 Stretch Forming: Metal Forming Market for Automotive, by Region, 2017-2025 (USD Billion)
7.4 Deep Drawing
7.4.1 Use of Plastics & Composites in Components Hampers Deep Drawing Segment in Europe and North America
Table 11 Deep Drawing: Metal Forming Market for Automotive, by Region, 2017-2025 (Million Ton)
Table 12 Deep Drawing: Metal Forming Market for Automotive, by Region, 2017-2025 (USD Billion)
7.5 Stamping
7.5.1 Wide Use of Stamping Drives Its Dominance in Metal Forming Market
Table 13 Stamping: Metal Forming Market for Automotive, by Region, 2017-2025 (Million Ton)
Table 14 Stamping: Metal Forming Market for Automotive, by Region, 2017-2025 (USD Billion)
7.6 Hydroforming
7.6.1 Demand for Better Surface Quality Drives the Market for Hydroforming Technique
Table 15 Hydroforming: Metal Forming Market for Automotive, by Region, 2017-2025 (Million Ton)
Table 16 Hydroforming: Metal Forming Market for Automotive, by Region, 2017-2025 (USD Billion)
7.7 Others
Table 17 Other Techniques: Metal Forming Market for Automotive, by Region, 2017-2025 (Million Ton)
Table 18 Other Techniques: Metal Forming Market for Automotive, by Region, 2017-2025 (USD Billion)

8 Metal Forming Market for Automotive, by Forming Type

8.1 Introduction
Figure 33 Metal Forming Market for Automotive, by Forming Type, 2020 Vs. 2025 (USD Billion)
Table 19 Metal Forming Market for Automotive, by Forming Type, 2017-2025 (Million Ton)
Table 20 Metal Forming Market for Automotive, by Forming Type, 2017-2025 (USD Billion)
8.1.1 Research Methodology
8.1.2 Assumptions
Table 21 Assumptions: by Forming Type
8.1.3 Key Primary Insights
Figure 34 Key Primary Insights
8.2 Cold Forming
8.2.1 Cold Forming to Remain Most Prominent and Economical Method of Forming for Automotive Parts
Table 22 Cold Forming: Metal Forming Market for Automotive, by Region, 2017-2025 (Million Ton)
Table 23 Cold Forming: Metal Forming Market for Automotive, by Region, 2017-2025 (USD Billion)
8.3 Hot Forming
8.3.1 Increasing Demand for Better-Quality Automotive Components to Drive Hot Forming Segment
Table 24 Hot Forming: Metal Forming Market for Automotive, by Region, 2017-2025 (Million Ton)
Table 25 Hot Forming: Metal Forming Market for Automotive, by Region, 2017-2025 (USD Billion)
8.4 Warm Forming
8.4.1 Advantages Over Hot and Cold Forming Propel Demand for Warm Forming Method
Table 26 Warm Forming: Metal Forming Market for Automotive, by Region, 2017-2025 (Million Ton)
Table 27 Warm Forming: Metal Forming Market for Automotive, by Region, 2017-2025 (USD Billion)

9 Metal Forming Market for Automotive, by Application

9.1 Introduction
Figure 35 Metal Forming Market for Automotive, by Application, 2020 Vs. 2025 (USD Billion)
Table 28 Metal Forming Market for Automotive, by Application, 2017-2025 (Million Ton)
Table 29 Metal Forming Market for Automotive, by Application, 2017-2025 (USD Billion)
9.1.1 Research Methodology
9.1.2 Assumptions
Table 30 Assumptions: by Application
9.1.3 Key Primary Insights
Figure 36 Key Primary Insights
9.2 BIW
Table 31 Ec and Eucar - Super Light-Car (Slc) Project
9.2.1 Biw Segment to Be Driven by High Vehicle Production in Asia Oceania
Table 32 BIW: Metal Forming Market for Automotive, by Region, 2017-2025 (Million Ton)
Table 33 BIW: Metal Forming Market for Automotive, by Region, 2017-2025 (USD Billion)
9.3 Chassis
9.3.1 Demand for Lightweighting of Lcvs and Commercial Vehicles Influences Demand for Chassis in North America
Table 34 Chassis: Metal Forming Market for Automotive, by Region, 2017-2025 (Million Ton)
Table 35 Chassis: Metal Forming Market for Automotive, by Region, 2017-2025 (USD Billion)
9.4 Closures
9.4.1 North America to Witness Highest Growth Rate for Closures
Table 36 Closures: Metal Forming Market for Automotive, by Region, 2017-2025 (Million Ton)
Table 37 Closures: Metal Forming Market for Automotive, by Region, 2017-2025 (USD Billion)
9.5 Others
9.5.1 Demand for Astatic Features to Drive Demand for Other Applications in North America
Table 38 Other Applications: Metal Forming Market for Automotive, by Region, 2017-2025 (Million Ton)
Table 39 Other Applications: Metal Forming Market for Automotive, by Region, 2017-2025 (USD Billion)

10 Metal Forming Market for Automotive, by Material

10.1 Introduction
Table 40 Average Mass Reduction with the Use of Lightweight Materials (%)
Figure 37 Metal Forming Market for Automotive, by Material, 2020 Vs. 2025
Table 41 Metal Forming Market for Automotive, by Material, 2017-2025 (Million Ton)
Table 42 Metal Forming Market for Automotive, by Material, 2017-2025 (USD Billion)
10.1.1 Research Methodology
10.1.2 Assumptions
Table 43 Assumptions: by Material
10.1.3 Key Primary Insights
Figure 38 Key Primary Insights
10.2 Steel
10.2.1 Marginal Decline in Adoption of Steel Likely, Owing to Trend of Multi-Material Body
Table 44 Steel: Metal Forming Market for Automotive, by Region, 2017-2025 (Million Ton)
Table 45 Steel: Metal Forming Market for Automotive, by Region, 2017-2025 (USD Billion)
10.3 Aluminum
10.3.1 Aluminum to Gain Prominence As Material of Choice for Biw During Forecast Period
Table 46 Aluminum: Metal Forming Market for Automotive, by Region, 2017-2025 (Million Ton)
Table 47 Aluminum: Metal Forming Market for Automotive, by Region, 2017-2025 (USD Billion)
10.4 Magnesium
10.4.1 Driven by Collaborations Between Oems and Tier 1 R&D, Adoption of Magnesium to Increase
Table 48 Magnesium: Metal Forming Market for Automotive, by Region, 2017-2025 (‘000 Ton)
Table 49 Magnesium: Metal Forming Market for Automotive, by Region, 2017-2025 (USD Billion)
10.5 Others
10.5.1 Asia Oceania to Grow at Highest CAGR for Other Materials
Table 50 Other Materials: Metal Forming Market for Automotive, by Region, 2017-2025 (‘000 Ton)
Table 51 Other Materials: Metal Forming Market for Automotive, by Region, 2017-2025 (USD Billion)

11 Metal Forming Market for Automotive, by Vehicle Type

11.1 Introduction
Figure 39 Metal Forming Market for Automotive, by Vehicle Type, 2020 Vs. 2025 (USD Billion)
Table 52 Metal Forming Market for Automotive, by Vehicle Type, 2017-2025 (Million Ton)
Table 53 Metal Forming Market for Automotive, by Vehicle Type, 2017-2025 (USD Billion)
11.1.1 Research Methodology
11.1.2 Assumptions
Table 54 Assumptions: by Vehicle Type
11.1.3 Key Primary Insights
Figure 40 Key Primary Insights
11.2 Passenger Cars
11.2.1 High Vehicle Production in Asia Pacific a Result of Increased Mobility Needs in China and India
Table 55 Passenger Cars: Metal Forming Market for Automotive, by Region, 2017-2025 (Million Ton)
Table 56 Passenger Cars: Metal Forming Market for Automotive, by Region, 2017-2025 (USD Billion)
11.3 Light Commercial Vehicles (Lcv)
11.3.1 Increasing Demand for Last-Mile Delivery to Increase Demand for Lcvs in North America
Table 57 Lcv: Metal Forming Market for Automotive, by Region, 2017-2025 (Million Ton)
Table 58 Lcv: Metal Forming Market for Automotive, by Region, 2017-2025 (USD Billion)
11.4 Trucks
11.4.1 Stringent Emission Norms to Result in Shift to Lightweight Solutions for Metal Forming in Trucks
Table 59 Trucks: Metal Forming Market for Automotive, by Region, 2017-2025 (Million Ton)
Table 60 Trucks: Metal Forming Market for Automotive, by Region, 2017-2025 (USD Billion)
11.5 Buses
11.5.1 Increasing Trend of Inter and Intra City Travel Spurs Demand for Buses
Table 61 Buses: Metal Forming Market for Automotive, by Region, 2017-2025 (Million Ton)
Table 62 Buses: Metal Forming Market for Automotive, by Region, 2017-2025 (USD Billion)

12 Metal Forming Market for Electric and Hybrid Vehicles, by Vehicle Type

12.1 Introduction
Figure 41 Metal Forming Market for Electric and Hybrid Vehicles, by Vehicle Type, 2020 Vs. 2025 (USD Billion)
Table 63 Metal Forming Market for Electric and Hybrid Vehicles, by Vehicle Type, 2017-2025 (000’ Ton)
Table 64 Metal Forming Market for Electric and Hybrid Vehicles, by Vehicle Type, 2017-2025 (USD Billion)
12.1.1 Research Methodology
12.1.2 Assumptions
Table 65 Assumptions: by Electric and Hybrid Vehicle Type
12.1.3 Key Primary Insights
Figure 42 Key Primary Insights
12.2 Bev
Table 66 Top Selling Models of Bev
12.2.1 Increasing Demand for Emission-Free Vehicles Stimulates Market for Bev Metal Forming
Table 67 Bev: Metal Forming Market for Electric and Hybrid Vehicles, by Region, 2017-2025 (000’ Ton)
Table 68 Bev: Metal Forming Market for Electric and Hybrid Vehicles, by Region, 2017-2025 (USD Billion)
12.3 Phev
12.3.1 Increasing Adoption of Low-Emission Vehicles Propels Phev Metal Forming Market
Table 69 Phev: Metal Forming Market for Electric and Hybrid Vehicles, by Region, 2017 -2025 (000’ Ton)
Table 70 Phev: Metal Forming Market for Electric and Hybrid Vehicles, by Region, 2017-2025 (USD Billion)
12.4 Fcev
12.4.1 Asia Pacific to Dominate Metal Forming Market for Fcev
Table 71 Fcev: Metal Forming Market for Electric and Hybrid Vehicles, by Region, 2017-2025 (000’ Ton)
Table 72 Fcev: Metal Forming Market for Electric and Hybrid Vehicles, by Region, 2017-2025 (USD Million)

13 Metal Forming Market for Automotive, by Region

13.1 Introduction
Figure 43 Metal Forming Market for Automotive, by Region, 2020 Vs. 2025 (USD Billion)
Table 73 Metal Forming Market for Automotive, by Region, 2017-2025 (Million Ton)
Table 74 Metal Forming Market for Automotive, by Region, 2017-2025 (USD Billion)
13.2 Asia Oceania
13.2.1 Impact of Covid-19 on Asia Oceania Metal Forming Market for Automotive
Figure 44 Asia Oceania Metal Forming Market for Automotive: Pre-Covid-19 Vs. Post-Covid-19 Scenario
Table 75 Asia Pacific: Metal Forming Market for Automotive, Pre-Covid-19 Vs. Post-Covid-19 Scenario (USD Billion)
Figure 45 Asia Oceania: Metal Forming Market for Automotive Snapshot
Figure 46 Asia Oceania: Metal Forming Market for Automotive, by Country, 2020 Vs. 2025 (USD Billion)
Table 76 Asia Oceania: Metal Forming Market for Automotive, by Country, 2017-2025 (Million Ton)
Table 77 Asia Oceania: Metal Forming Market for Automotive, by Country, 2017-2025 (USD Billion)
13.2.2 China
13.2.2.1 Roll Forming to Account for Largest Market Share in China
Table 78 China: Metal Forming Market for Automotive, by Technique, 2017-2025 (Million Ton)
Table 79 China: Metal Forming Market for Automotive, by Technique, 2017-2025 (USD Billion)
13.2.3 India
13.2.3.1 Increasing Production of Mid-Level Cars to Drive Demand for Hydroforming in India
Table 80 India: Metal Forming Market for Automotive, by Technique, 2017-2025 (Million Ton)
Table 81 India: Metal Forming Market for Automotive, by Technique, 2017-2025 (USD Billion)
13.2.4 Japan
13.2.4.1 Mature Automotive Market in Japan to Witness Slow Growth in Forecast Period
Table 82 Japan: Metal Forming Market for Automotive, by Technique, 2017-2025 (Million Ton)
Table 83 Japan: Metal Forming Market for Automotive, by Technique, 2017-2025 (USD Billion)
13.2.5 South Korea
13.2.5.1 Stamping to Dominate the Market in South Korea
Table 84 South Korea: Metal Forming Market for Automotive, by Technique, 2017-2025 (Million Ton)
Table 85 South Korea: Metal Forming Market for Automotive, by Technique, 2017-2025 (USD Billion)
13.2.6 Thailand
13.2.6.1 Market in Thailand to Witness Slow Growth in Forecast Period
Table 86 Thailand: Metal Forming Market for Automotive, by Technique, 2017-2025 (Million Ton)
Table 87 Thailand: Metal Forming Market for Automotive, by Technique, 2017-2025 (USD Billion)
13.2.7 Rest of Asia Oceania
13.2.7.1 Countries Such As Indonesia Boost Demand for Hydroforming in the Rest of Asia Oceania
Table 88 Rest of Asia Oceania: Metal Forming Market for Automotive, by Technique, 2017-2025 (Million Ton)
Table 89 Rest of Asia Oceania: Metal Forming Market for Automotive, by Technique, 2017-2025 (USD Billion)
13.3 Europe
13.3.1 Impact of Covid-19 on the European Metal Forming Market for Automotive
Figure 47 European Metal Forming Market: Pre-Covid-19 Vs. Post-Covid-19 Scenario
Table 90 Europe: Metal Forming Market for Automotive Market, Pre-Covid-19 Vs. Post-Covid-19 Scenario (USD Billion)
Figure 48 Europe: Metal Forming Market for Automotive Snapshot
Figure 49 Europe: Metal Forming Market for Automotive, by Country, 2020 Vs. 2025 (USD Billion)
Table 91 Europe: Metal Forming Market for Automotive, by Country, 2017-2025 (Million Ton)
Table 92 Europe: Metal Forming Market for Automotive, by Country, 2017-2025 (USD Billion)
13.3.2 France
13.3.2.1 Trend of Lightweighting Hampers Growth of Deep Drawing Segment in France
Table 93 France: Metal Forming Market for Automotive, by Technique, 2017-2025 (Million Ton)
Table 94 France: Metal Forming Market for Automotive, by Technique, 2017-2025 (USD Billion)
13.3.3 Germany
13.3.3.1 Germany - Europe’S Vehicle Manufacturing Hub to Account for Largest Share in Metal Forming Market
Table 95 Germany: Metal Forming Market for Automotive, by Technique, 2017-2025 (Million Ton)
Table 96 Germany: Metal Forming Market for Automotive, by Technique, 2017-2025 (USD Billion)
13.3.4 Russia
13.3.4.1 Stamping to Hold Largest Share of Metal Forming Market in Russia
Table 97 Russia: Metal Forming Market for Automotive, by Technique, 2017-2025 (Million Ton)
Table 98 Russia: Metal Forming Market for Automotive, by Technique, 2017-2025 (USD Billion)
13.3.5 Spain
13.3.5.1 Lightweighting Trend to Boost Demand for Hydroforming in Spain
Table 99 Spain: Metal Forming Market for Automotive, by Technique, 2017-2025 (Million Ton)
Table 100 Spain: Metal Forming Market for Automotive, by Technique, 2017-2025 (USD Billion)
13.3.6 Turkey
13.3.6.1 Turkey Projected to Be Fastest-Growing Market in Europe
Table 101 Turkey: Metal Forming Market for Automotive, by Technique, 2017-2025 (Million Ton)
Table 102 Turkey: Metal Forming Market for Automotive, by Technique, 2017-2025 (USD Billion)
13.3.7 Uk
13.3.7.1 Stamping Estimated to Account for Largest Share, Followed by Roll Forming in the Uk
Table 103 Uk: Metal Forming Market for Automotive, by Technique, 2017-2025 (Million Ton)
Table 104 Uk: Metal Forming Market for Automotive, by Technique, 2017-2025 (USD Billion)
13.3.8 Rest of Europe
13.3.8.1 Demand from High-Income Nordic Countries to Drive Demand for Hydroforming in Forecast Period
Table 105 Rest of Europe: Metal Forming Market for Automotive, by Technique, 2017-2025 (Million Ton)
Table 106 Rest of Europe: Metal Forming Market for Automotive, by Technique, 2017-2025 (USD Billion)
13.4 North America
13.4.1 Impact of Covid-19 on North American Metal Forming Market for Automotive
Figure 50 North American Metal Forming Market for Automotive: Pre-Covid-19 Vs. Post-Covid-19 Scenario
Table 107 North America: Metal Forming Market for Automotive, Pre-Covid-19 Vs. Post-Covid-19 Scenario (USD Billion)
Figure 51 North America: Metal Forming Market for Automotive Snapshot
Figure 52 North America: Metal Forming Market for Automotive, by Country, 2020 Vs. 2025 (USD Billion)
Table 108 North America: Metal Forming Market for Automotive, by Country, 2017-2025 (Million Ton)
Table 109 North America: Metal Forming Market for Automotive, by Country, 2017-2025 (USD Billion)
13.4.2 Canada
13.4.2.1 Stringent Emission Standards to Drive Demand for Hydroforming in Canada
Table 110 Canada: Metal Forming Market for Automotive, by Technique, 2017-2025 (Million Ton)
Table 111 Canada: Metal Forming Market for Automotive, by Technique, 2017-2025 (USD Billion)
13.4.3 Mexico
13.4.3.1 Increasing Demand for Mobility to Drive Mexican Market for Vehicles, and Subsequently Metal Forming
Table 112 Mexico: Metal Forming Market for Automotive, by Technique, 2017-2025 (Million Ton)
Table 113 Mexico: Metal Forming Market for Automotive, by Technique, 2017-2025 (USD Billion)
13.4.4 Us
13.4.4.1 Us Estimated to Account for Largest Market Share in North America
Table 114 Us: Metal Forming Market for Automotive, by Technique, 2017-2025 (Million Ton)
Table 115 Us: Metal Forming Market for Automotive, by Technique, 2017-2025 (USD Billion)
13.5 South America
Figure 53 South America: Metal Forming Market for Automotive, by Country, 2020 Vs. 2025 (USD Billion)
13.5.1 Impact of Covid-19 on South American Metal Forming Market for Automotive
Figure 54 South American Metal Forming Market for Automotive: Pre-Covid-19 Vs. Post-Covid-19 Scenario
Table 116 South America: Metal Forming Market for Automotive, Pre-Covid-19 Vs. Post-Covid-19 Scenario (USD Billion)
Table 117 South America: Metal Forming Market for Automotive, by Country, 2017-2025 (Million Ton)
Table 118 South America: Metal Forming Market for Automotive, by Country, 2017-2025 (USD Billion)
13.5.2 Brazil
13.5.2.1 Brazil Estimated to Record Fastest Growth and Account for Largest Share in the Region
Table 119 Brazil: Metal Forming Market for Automotive, by Technique, 2017-2025 (Million Ton)
Table 120 Brazil: Metal Forming Market for Automotive, by Technique, 2017-2025 (USD Billion)
13.5.3 Argentina
13.5.3.1 Emission Regulations in Argentina to Drive Market for Hydroforming
Table 121 Argentina: Metal Forming Market for Automotive, by Technique, 2017-2025 (Million Ton)
Table 122 Argentina: Metal Forming Market for Automotive, by Technique, 2017-2025 (USD Billion)
13.6 Middle East & Africa
Figure 55 Middle East & Africa: Metal Forming Market for Automotive, by Country, 2020 Vs. 2025 (USD Billion)
13.6.1 Impact of Covid-19 on Middle East & Africa Metal Forming Market for Automotive
Figure 56 Middle East & Africa Metal Forming Market for Automotive: Pre-Covid-19 Vs. Post-Covid-19 Scenario
Table 123 Middle East & Africa: Metal Forming Market for Automotive, Pre-Covid-19 Vs. Post-Covid-19 Scenario (USD Billion)
Table 124 Middle East & Africa: Metal Forming Market for Automotive, by Country, 2017-2025 (Million Ton)
Table 125 Middle East & Africa: Metal Forming Market for Automotive, by Country, 2017-2025 (USD Billion)
13.6.2 Iran
13.6.2.1 Debt-Ridden Automotive Industry in Iran to Witness Flat Growth in Forecast Period
Table 126 Iran: Metal Forming Market for Automotive, by Technique, 2017-2025 (000’ Ton)
Table 127 Iran: Metal Forming Market for Automotive, by Technique, 2017-2025 (USD Million)
13.6.3 South Africa
13.6.3.1 Increasing Population in South Africa to Drive Demand for Mobility
Table 128 South Africa: Metal Forming Market for Automotive, by Technique, 2017-2025 (Million Ton)
Table 129 South Africa: Metal Forming Market for Automotive, by Technique, 2017-2025 (USD Million)

14 Competitive Landscape

14.1 Overview
Figure 57 Companies Adopted Expansions As the Key Growth Strategy, 2017-2020
14.2 Metal Forming Market for Automotive: Market Ranking Analysis
Figure 58 Metal Forming Market for Automotive: Ranking Analysis, 2019
14.3 Competitive Leadership Mapping
14.3.1 Stars
14.3.2 Emerging Leaders
14.3.3 Pervasive Companies
14.3.4 Emerging Companies
Figure 59 Metal Forming Market for Automotive: Competitive Leadership Mapping, 2020
14.4 Competitive Scenario
14.4.1 Expansions
Table 130 Expansions, 2017-2020
14.4.2 Supply Contracts
Table 131 Supply Contracts, 2017-2020
14.4.3 New Product Launches/Developments
Table 132 New Product Launches/Developments, 2017-2020
14.4.4 Partnerships/Joint Ventures
Table 133 Partnership/Joint Ventures, 2017-2020

15 Company Profiles

15.1 Introduction
15.2 Benteler
Figure 60 Benteler: Company Snapshot
Figure 61 Benteler: Swot Analysis
15.3 Tower International
Figure 62 Tower International: Company Snapshot
Figure 63 Tower International: Swot Analysis
15.4 Magna International
Figure 64 Magna: Company Snapshot
Figure 65 Magna: Swot Analysis
15.5 Toyota Boshoku Corporation
Figure 66 Toyota Boshoku: Company Snapshot
Figure 67 Toyota Boshoku: Swot Analysis
15.6 Aisin Seiki
Figure 68 Aisin Seiki: Company Snapshot
Figure 69 Aisin Seiki: Swot Analysis
15.7 Kirchhoff
Figure 70 Kirchhoff: Company Snapshot
15.8 Cie Automotive
Figure 71 Cie Automotive: Company Snapshot
15.9 Mills Products
15.10 Vnt Automotive
15.11 Superform Aluminium
15.12 Hirotec
15.13 Client Requirement
15.13.1 Pwo
Table 134 Pwo: Product Offerings
Table 135 Pwo: Key Customers
15.13.2 Ernst Umformtechnik
Table 136 Ernst Umformtechnik: Product Offerings
Table 137 Ernst Umformtechnik: Key Customers
15.13.3 Hörnlein
Table 138 Hornlein: Product Offerings
15.13.4 Hubert Stüken Gmbh & Co. Kg (Stüken)
Table 139 Stüken: Product Offerings
15.13.5 Stewart Efi
Table 140 Stewart Efi: Product Offerings
15.13.6 Truelove & Maclean (Acquired by Sfs Group Ag)
Table 141 Truelove & Maclean: Industries Served
15.13.7 Metal Flow
Table 142 Metal Flow: Product Offerings
Table 143 Metal Flow: Key Customers
15.13.8 Transfer Tool
Table 144 Transfer Tool: Industries Served
15.14 Additional Companies
15.14.1 North America
15.14.1.1 Vari-Form
15.14.1.2 Ltc Roll
15.14.1.3 Martinrea International Inc
15.14.1.4 Multimatic
15.14.2 Asia Oceania
15.14.2.1 Kaizen Metal Forming
15.14.2.2 Aes Automotive
15.14.2.3 Jbm Auto
15.14.2.4 Mim
15.14.3 Europe
15.14.3.1 Craemer
15.14.3.2 Voestalpine
15.14.3.3 Gestamp Automoción
15.14.3.4 Quintus Technologies

16 Appendix

16.1 Currency
Table 145 Currency Exchange Rates (USD)
16.2 Discussion Guide
16.3 Knowledgestore: Subscription Portal
16.4 Available Customizations
16.5 Related Reports
16.6 Author Details

Executive Summary

Companies Mentioned

AES Automotive
Aisin Seiki
Benteler
CIE Automotive
Craemer
Ernst Umformtechnik
Gestamp Automoción
Hirotec
Hubert Stüken Gmbh & Co. Kg (Stüken)
Hörnlein
JBM Auto
Kaizen Metal Forming
Kirchhoff
LTC Roll
Magna International
Martinrea International Inc
Metal Flow
Mills Products
Mim
Multimatic
Pwo
Quintus Technologies
Stewart Efi
Superform Aluminium
Tower International
Toyota Boshoku Corporation
Transfer Tool
Truelove & Maclean (Acquired by Sfs Group Ag)
Vari-Form
VNT Automotive
Voestalpine

Methodology

LOADING...

Table Information

Report Attribute	Details
No. of Pages	208
Published	July 2020
Forecast Period	2018 - 2025
Estimated Market Value ( USD ) in 2018	$ 172.56 billion
Compound Annual Growth Rate	2.3%
Regions Covered	Global
No. of Companies Mentioned	31

License	Format	Properties	Price
SINGLE USER LICENSE PDF	The product is a PDF.	This is a single user license, allowing one user access to the product.	€4797EUR$4,950USD£4,109GBP
1 - 5 USER LICENSE PDF	The product is a PDF.	This is a 1-5 user license, allowing up to five users have access to the product.	€6445EUR$6,650USD£5,520GBP
SITE LICENSE PDF	The product is a PDF.	This is a site license, allowing all users within a given geographical location of your organization access to the product.	€7898EUR$8,150USD£6,765GBP
ENTERPRISE LICENSE PDF	The product is a PDF.	This is an enterprise license, allowing all employees within your organization access to the product.	€9691EUR$10,000USD£8,300GBP

Metal Forming Market for Automotive by Technique (Roll, Stretch, Stamping, Deep Drawing, Hydroforming), Type (Hot, warm and Cold), Application (BIW, Chassis, Closure), Material (Steel, Aluminum, Magnesium), Vehicle (ICE & Electric) - Global Forecast to 2025

Table of Contents

Executive Summary

Companies Mentioned

Methodology

Table Information

Table of Contents

Executive Summary

Companies Mentioned

Methodology

Table Information

Related Topics

Related Reports

Global Automotive Market - Global Industry Size, Share, Trends, Opportunity, and Forecast, 2018-2028

North America Automotive - Market Share Analysis, Industry Trends & Statistics, Growth Forecasts 2019 - 2029

Africa Automotive - Market Share Analysis, Industry Trends & Statistics, Growth Forecasts (2024 - 2029)

Automotive Multilayer Display Global Market Report 2024

Automotive Metal Forming Techniques - Global Strategic Business Report