+353-1-416-8900REST OF WORLD
+44-20-3973-8888REST OF WORLD
1-917-300-0470EAST COAST U.S
1-800-526-8630U.S. (TOLL FREE)
New

Europe Data Center Transformer - Market Share Analysis, Industry Trends & Statistics, Growth Forecasts (2027-2032)

  • PDF Icon

    Report

  • 185 Pages
  • October 2026
  • Region: Europe
  • Mordor Intelligence
  • ID: 6294185
The Europe data center transformer market size is projected to expand from USD 1.94 billion in 2026 and USD 2.10 billion in 2027 to USD 2.92 billion by 2032, registering a CAGR of 6.82% between 2027 to 2032. This report is Segmented by Transformer Type (Liquid-Immersed Transformers and Dry-Type Transformers), Power Rating (Up To 10 MVA, and More), Voltage Level (Low Voltage, and More), Installation (Indoor Installation and Outdoor Installation), Data Center Size (Small, Medium, and More), Data Center Type (Colocation, and More), and Country. The Market Forecasts are Provided in Terms of Value (USD).

Europe Data Center Transformer Market Trends and Insights

Expansion of Hyperscale and Colocation Data Centers

Hyperscale campuses are changing power designs because each site needs more transformer capacity and higher equipment ratings. European data center electricity demand is expected to exceed 134 TWh by 2030, which supports sustained demand for intake and distribution equipment. The EU policy agenda seeks to expand regional data center capacity, extending the need for equipment across several national markets. Grid congestion in major hubs is redirecting projects rather than stopping development. Italy recorded 42 GW of data center connection requests by the end of March 2025, compared with 30 GW at the end of 2024. Countries with shorter connection timelines can attract more facilities, and each new facility requires its own step-down equipment hierarchy.

Rising AI-Driven Power Density and High-Capacity Campus Loads

AI computing increases the capacity required from transformers because modern training racks can exceed 100 kW. Conventional cloud racks typically operated at 5 kW to 10 kW, creating a significant difference in site power design. Larger AI campuses, therefore, require higher-rated intake units and stronger internal distribution systems. Research on a 1.6 MW power block found that an 800 V DC arrangement could save 364.7 MWh annually compared with a 400 V AC design. Conventional medium-voltage isolation transformers remain necessary during the transition to these architectures. The Europe data center transformer market therefore retains demand across both established AC systems and emerging DC-oriented designs.

Extended Transformer Lead Times and Manufacturing Capacity Constraints

Manufacturing lead times are a material constraint on new European data center capacity. The IEA reported in 2025 that procurement for large power transformers can take up to 4 years, twice the 2021 baseline. Medium-voltage distribution units below 3.15 MVA generally have shorter schedules than high-voltage units above 30 MVA. Large units can carry 36-60 month schedules at Tier 1 suppliers. Operators can gain more flexibility by using smaller distribution transformers in parallel rather than one very large intake unit. This design choice is shaping procurement and engineering decisions across the Europe data center transformer market.

Other drivers and restraints analyzed in the detailed report include:

  1. EU Transformer Efficiency Upgrades and Ecodesign Compliance
  2. Renewable Power Integration and Electrification of Data Center Campuses
  3. Grid Connection Queues and Local Network Congestion

Segment Analysis

Liquid-immersed transformers held 73.19% share in 2026, giving them the leading position in the transformer type category. Their position reflects lower cost at high-voltage intake substations, established thermal performance, and suitability for large outdoor campus installations that have adequate space for fenced electrical compounds. CHINT delivered 2 132/15 kV, 60 MVA oil-immersed units for ARUBA’s IT3 Global Cloud Data Center in Italy during November 2025, confirming the continued use of this configuration for large campus intake infrastructure. Operators also benefit from familiar maintenance practices and a broad base of experience with these units, particularly where high-capacity grid connections feed a new campus. These advantages keep liquid-filled equipment central to large developments even as indoor alternatives gain wider acceptance.

Dry-type transformers are projected to expand at a 7.68% CAGR through 2032, making them the fastest-moving transformer type. Their adoption is supported by indoor installation requirements, fire-safety considerations, and dense urban settings where oil containment can be difficult or where site space limits an outdoor compound. Cast-resin systems can place equipment closer to internal distribution loads and can be integrated with building-based power designs without handling flammable liquids. IEC 60076-11 provides the relevant fire-performance framework, while EU Ecodesign requirements apply across liquid-immersed and dry-type equipment. The contrast between outdoor intake demand and indoor safety needs means that both product types will remain necessary across European data center projects.

The above 10 MVA to 30 MVA band held 38.51% of the Europe data center transformer market size in 2026. It serves colocation facilities and mid-tier hyperscale campuses with grid connections in the 30 MW to 100 MW range, where designs commonly use 2-4 transformers at the intake substation. This rating range offers a balance between capacity, redundancy, site layout, and the ability to isolate a fault without affecting the entire facility. Using several units also helps operators stage capacity additions as customer loads rise and improve resilience during maintenance. The category remains important for projects that need significant power capacity without relying entirely on one bespoke ultra-large transformer.

Above 30 MVA units are projected to expand at a 7.51% CAGR through 2032. AI campuses and direct transmission connections are increasing demand for large bespoke equipment, particularly where operators want to consolidate intake capacity at a dedicated substation. Higher ratings can reduce the number of intake transformers required, but they make factory slots, transport planning, lead times, and site commissioning more consequential. IEC 60076-1 standards remain relevant for manufacturers producing these large power transformers for critical electrical applications. The segment favors suppliers with specialized factory tooling, engineering capability, and the ability to reserve production capacity well before a project reaches construction.

Complete Report Scope:

  • By Transformer Type
    • Liquid-Immersed Transformers
    • Dry-Type Transformers
  • By Power Rating
    • Up to 10 MVA
    • Above 10 MVA to 30 MVA
    • Above 30 MVA
  • By Voltage Level
    • Low Voltage
    • Medium Voltage
    • High Voltage
  • By Installation
    • Indoor Installation
    • Outdoor Installation
  • By Data Center Size
    • Small
    • Medium
    • Large
    • Hyperscale
  • By Data Center Type
    • Colocation
    • Cloud Service Provider
    • Enterprise Data Centers/Edge
  • By Country
    • United Kingdom
    • Germany
    • France
    • Spain
    • Italy
    • Rest of Europe

List of Companies Covered in this Report:

  1. ABB Ltd.
  2. Siemens Energy AG
  3. Hitachi Energy Ltd.
  4. Schneider Electric SE
  5. General Electric Vernova Inc.
  6. Eaton Corporation plc
  7. Mitsubishi Electric Corporation
  8. Toshiba Energy Systems and Solutions Corporation
  9. SGB-SMIT Group
  10. Hyosung Heavy Industries Co., Ltd.
  11. CG Power and Industrial Solutions Limited
  12. Ormazabal (Velatia)
  13. Pauwels Transformers NV
  14. KOŃCAR Power Transformers d.d.
  15. Weg Transformers
  16. Wilson Power Solutions Ltd.
  17. SEA S.p.A.
  18. GBE S.p.A.
  19. Efacec Power Solutions S.A.
  20. Kolektor Etra d.o.o.

Additional Benefits:

  • The market estimate (ME) sheet in Excel format
  • 3 months of analyst support

Table of Contents

1 INTRODUCTION
1.1 Study Assumptions and Market Definition
1.2 Scope of the Study
2 RESEARCH METHODOLOGY3 EXECUTIVE SUMMARY
4 MARKET LANDSCAPE
4.1 Market Overview
4.2 Impact of Macroeconomic Factors on the Market
4.3 Market Drivers
4.3.1 Expansion of Hyperscale and Colocation Data Centers
4.3.2 Rising AI-Driven Power Density and High-Capacity Campus Loads
4.3.3 EU Transformer Efficiency Upgrades and Ecodesign Compliance
4.3.4 Renewable Power Integration and Electrification of Data Center Campuses
4.3.5 Digital Monitoring and Predictive Maintenance Adoption
4.3.6 Shorter Energization Pathways Through Modular Substations
4.4 Market Restraints
4.4.1 Extended Transformer Lead Times and Manufacturing Capacity Constraints
4.4.2 Grid Connection Queues and Local Network Congestion
4.4.3 Electrical Steel, Copper, and Specialized Component Cost Volatility
4.4.4 Harmonic-Rich Loads and More Complex Power-Quality Requirements
4.5 Industry Value Chain Analysis
4.6 Regulatory Landscape
4.7 Technological Outlook
4.8 Porter's Five Forces Analysis
4.8.1 Competitive Rivalry
4.8.2 Threat of New Entrants
4.8.3 Bargaining Power of Suppliers
4.8.4 Bargaining Power of Buyers
4.8.5 Threat of Substitutes
5 MARKET SIZE AND GROWTH FORECASTS (VALUE)
5.1 By Transformer Type
5.1.1 Liquid-Immersed Transformers
5.1.2 Dry-Type Transformers
5.2 By Power Rating
5.2.1 Up to 10 MVA
5.2.2 Above 10 MVA to 30 MVA
5.2.3 Above 30 MVA
5.3 By Voltage Level
5.3.1 Low Voltage
5.3.2 Medium Voltage
5.3.3 High Voltage
5.4 By Installation
5.4.1 Indoor Installation
5.4.2 Outdoor Installation
5.5 By Data Center Size
5.5.1 Small
5.5.2 Medium
5.5.3 Large
5.5.4 Hyperscale
5.6 By Data Center Type
5.6.1 Colocation
5.6.2 Cloud Service Provider
5.6.3 Enterprise Data Centers/Edge
5.7 By Country
5.7.1 United Kingdom
5.7.2 Germany
5.7.3 France
5.7.4 Spain
5.7.5 Italy
5.7.6 Rest of Europe
6 COMPETITIVE LANDSCAPE
6.1 Market Concentration
6.2 Strategic Moves
6.3 Market Share Analysis
6.4 Company Profiles (includes Global Level Overview, Market Level Overview, Core Segments, Financials as available, Strategic Information, Market Rank/Share, Products and Services, Recent Developments)
6.4.1 ABB Ltd.
6.4.2 Siemens Energy AG
6.4.3 Hitachi Energy Ltd.
6.4.4 Schneider Electric SE
6.4.5 General Electric Vernova Inc.
6.4.6 Eaton Corporation plc
6.4.7 Mitsubishi Electric Corporation
6.4.8 Toshiba Energy Systems and Solutions Corporation
6.4.9 SGB-SMIT Group
6.4.10 Hyosung Heavy Industries Co., Ltd.
6.4.11 CG Power and Industrial Solutions Limited
6.4.12 Ormazabal (Velatia)
6.4.13 Pauwels Transformers NV
6.4.14 KONCAR Power Transformers d.d.
6.4.15 Weg Transformers
6.4.16 Wilson Power Solutions Ltd.
6.4.17 SEA S.p.A.
6.4.18 GBE S.p.A.
6.4.19 Efacec Power Solutions S.A.
6.4.20 Kolektor Etra d.o.o.
7 MARKET OUTLOOK AND FUTURE TRENDS
7.1 White-Space and Unmet-Need Assessment
7.2 Future Outlook, 2027-2032

Companies Mentioned (Partial List)

A selection of companies mentioned in this report includes, but is not limited to:

  • ABB Ltd.
  • Siemens Energy AG
  • Hitachi Energy Ltd.
  • Schneider Electric SE
  • General Electric Vernova Inc.
  • Eaton Corporation plc
  • Mitsubishi Electric Corporation
  • Toshiba Energy Systems and Solutions Corporation
  • SGB-SMIT Group
  • Hyosung Heavy Industries Co., Ltd.
  • CG Power and Industrial Solutions Limited
  • Ormazabal (Velatia)
  • Pauwels Transformers NV
  • KOŃCAR Power Transformers d.d.
  • Weg Transformers
  • Wilson Power Solutions Ltd.
  • SEA S.p.A.
  • GBE S.p.A.
  • Efacec Power Solutions S.A.
  • Kolektor Etra d.o.o.