South America Data Center Sustainable Cooling Market Trends and Insights
Hyperscale and AI Workload Expansion Redefines Regional Thermal Architecture
AI platforms are changing how regional operators plan cooling capacity because rack heat loads are increasing beyond the practical range of conventional room air systems. Elea Data Centers agreed with Vertiv to deploy cooling distribution units for AI workloads in São Paulo as part of its first-phase investment program. The deployment provides a regional example of liquid cooling being designed into the facility rather than added after capacity constraints emerge. AWS is also building its South America Chile Region across 3 availability zones with independent supporting infrastructure. These developments make equipment selection more closely tied to server roadmaps and future rack density than to the original building specification. They also require owners to consider distribution units, piping, heat exchangers, controls, and service arrangements at the same time as server selection. Operators that standardize scalable liquid cooling can reduce the need to operate separate cooling designs through successive hardware changes.Cloud, Colocation, and Digital Infrastructure Investment Raises the Efficiency Floor
Large investment programs are raising the performance threshold for cooling systems across South America. Equinix confirmed more than USD 420 million of regional investment for 2025-2026, including USD 270 million in Brazil and USD 42 million for the ST2 second phase in Chile. Ascenty allocated USD 1 billion across 13 projects during 2026. Each new hyperscale or large colocation project makes lower power and water use more visible in commercial procurement. It also creates a clear operating example for customers that compare capacity availability, resilience, energy use, and water performance across potential facilities. Colocation operators that serve enterprise customers face greater pressure to align their equipment choices with the standards expected by large cloud tenants. This creates demand for cooling systems that can perform efficiently while still supporting incremental expansion.High Capital Intensity of Advanced Cooling Creates Procurement Friction
Moving from air cooling to direct-to-chip or immersion cooling significantly increases the upfront cost of a 20 MW AI-ready facility. The added requirement is more difficult for mid-sized colocation companies that serve regional enterprise customers. Fixed debt-service structures can also make investment decisions more sensitive to financing conditions. Many operators are responding with phased hybrid deployment, keeping air systems for standard compute areas and adding liquid cooling for denser AI racks. This reduces initial capital exposure but creates an operational need to maintain 2 cooling systems. The resulting complexity can limit the full efficiency benefits available from a single, integrated plant design.Other drivers and restraints analyzed in the detailed report include:
- Energy-Efficiency and Sustainability Mandates Drive Compliance-Led Procurement
- Digitalization, 5G, and Edge Computing Deployment Extends Cooling Demand to Secondary Markets
- Operational Energy Draw of Cooling Infrastructure Creates a Competing Efficiency Demand
Segment Analysis
Air-based cooling held 45.88% of the cooling technology segmentation in 2026. Its position reflects the broad installed base of computer room air-conditioning systems and in-row equipment at established enterprise and colocation facilities. Brazil and Chile have many campuses that were built around air-side distribution before high-density AI deployments became common. These systems continue to serve conventional computing loads and residual room heat in mixed cooling environments. Evaporative and adiabatic systems remain relevant where ambient conditions support their use. Free cooling and economizer designs also provide options where local climate conditions permit a lower mechanical cooling load. The South America data center sustainable cooling market share held by air-based equipment therefore reflects installed infrastructure as much as current procurement preference.Direct-to-chip liquid cooling is the fastest-expanding cooling technology as operators prepare for denser AI hardware. Elea’s São Paulo deployment with Vertiv provides a visible example of cooling distribution units being deployed for this workload. Immersion cooling and rear-door heat exchangers serve more specialized high-performance computing and retrofit needs. Liquid systems can remove heat close to the source, which reduces pressure on room-level air systems. The technology choice also affects piping, water treatment, monitoring, maintenance, and staff training requirements. Operators are likely to use hybrid designs while they transition between existing air-cooled capacity and newer liquid-cooled racks. Vendors that can support these mixed environments have an advantage in campuses that cannot replace their full cooling plant at once.
Air-cooled systems held 45.21% of the heat rejection technology segmentation in 2026. Their installed base is particularly broad across Brazil’s interior cities and Chile’s secondary markets. These systems are familiar to local operators and can avoid dependence on continuous water use. Water-cooled systems remain important at larger campuses in São Paulo and Santiago, where chilled-water plants support higher capacity requirements. Santiago’s local water constraints are steering new design choices toward closed-loop glycol alternatives. The South America data center sustainable cooling market size for air-cooled heat rejection remains supported by existing facility layouts and service familiarity.
Hybrid heat rejection systems are projected to expand at a 13.74% CAGR through 2032. They combine methods such as adiabatic pre-cooling, dry cooling, free-side economizing, and mechanical refrigeration. This gives operators more flexibility to manage the balance between electricity demand and water use as conditions change. ODATA’s BG02 and BG03 campuses in Tenjo incorporated Delta Cube technology to support rack densities of 50 kW. The project shows how hybrid heat rejection can be built into a hyperscale site from the design stage. Vendors are also developing low-global-warming-potential refrigerant products for high-density applications. Airedale by Modine’s TurboChill DCS uses R1234ze, which has a global warming potential of 1.37.
Complete Report Scope:
- By Cooling Technology
- Air-Based Cooling
- Direct-to-Chip Liquid Cooling
- Immersion Cooling
- Rear-Door Heat Exchangers
- Evaporative and Adiabatic Cooling
- Free Cooling and Economizer Systems
- Other Sustainable Cooling Technologies
- By Heat Rejection Technology
- Air-Cooled Systems
- Water-Cooled Systems
- Evaporative Heat Rejection
- Dry Coolers
- Hybrid Heat Rejection Systems
- By Cooling System Component
- Cooling Distribution Units
- Chillers
- Cooling Towers
- Heat Exchangers
- Pumps and Fluid Distribution Systems
- Fans and Air Handling Equipment
- Cooling Controls and Monitoring Systems
- By Sustainability Approach
- Energy-Efficient Cooling
- Water-Efficient Cooling
- Low-Global-Warming-Potential Refrigerant Solutions
- Heat Recovery-Enabled Cooling
- Integrated Cooling Optimization and Controls
- By Data Center Size
- Small
- Medium
- Large
- Hyperscale
- By Data Center Type
- Colocation
- Cloud Service Providers
- Enterprise and Edge
- By South America
- Brazil
- Argentina
- Chile
- Colombia
- Peru
- Rest of South America
List of Companies Covered in this Report:
- Vertiv Holdings Co
- Schneider Electric SE
- STULZ GmbH
- Rittal GmbH & Co. KG
- Johnson Controls International plc
- Munters Group AB
- Daikin Industries, Ltd.
- Mitsubishi Electric Corporation
- Alfa Laval AB
- Carrier Global Corporation
- Trane Technologies plc
- Modine Manufacturing Company
- Motivair Corporation
- CoolIT Systems Inc.
- LiquidStack Inc.
- Submer Technologies S.L.
- Iceotope Technologies Limited
- Green Revolution Cooling, Inc.
- Asperitas B.V.
- Scala Data Centers
- ODATA
- Ascenty
- Elea Digital
- Equinix, Inc.
- Cirion Technologies
- Gtd
- EdgeUno
Additional Benefits:
- The market estimate (ME) sheet in Excel format
- 3 months of analyst support
Table of Contents
Companies Mentioned (Partial List)
A selection of companies mentioned in this report includes, but is not limited to:
- Vertiv Holdings Co
- Schneider Electric SE
- STULZ GmbH
- Rittal GmbH & Co. KG
- Johnson Controls International plc
- Munters Group AB
- Daikin Industries, Ltd.
- Mitsubishi Electric Corporation
- Alfa Laval AB
- Carrier Global Corporation
- Trane Technologies plc
- Modine Manufacturing Company
- Motivair Corporation
- CoolIT Systems Inc.
- LiquidStack Inc.
- Submer Technologies S.L.
- Iceotope Technologies Limited
- Green Revolution Cooling, Inc.
- Asperitas B.V.
- Scala Data Centers
- ODATA
- Ascenty
- Elea Digital
- Equinix, Inc.
- Cirion Technologies
- Gtd
- EdgeUno

